|
|
||||
| Contact us | >
The following are the samples which is going to be carried out MSCoating processing to jet engine parts. In addition, it is possible to apply MSCoating in not only a jet engine but also many fields.
When you wish sample processed, please contact here.
 |
Anti wear coating on LPT Turbine blade interlock hard face. |
 |
Abrasive (it had performance cutting off partner) coating at the tip of LPT turbine blade which cut off partner. MSCoating makes it possible to process abrasive coating easily at low cost. |
 |
Tip repair of HP turbine blade. The blade material is sensitive for welding crack. MSCoating enables us to build up without cracks and with center depression and as airfoil shape on tip end. |
 |
Tip repair of HP compressor blade. MSCoating enables us to build up without masking and bench work. |
 |
Abrasive coating at the tip of compressor blade which cut off partner. MSCoating makes it possible to process abrasive coating easily at low cost. |
 |
Abrasive coating at on a labyrinths of air seal. It is easy to wear out in order that a thin tip part may rub against partner parts. |
 |
Anti wear coating on mid-span of a fan blade. MSCoating enables us to coat without masking and bench work. |
 |
Hard coating on the outer diameter of a shaft. No peeling and very hard coating. |