IHI Centrifuge | HL2S | GUINARD CENTRIFUGE

SEPARATOR / DEHYDRATOR

Guinard Centrifuge

HL2S Type

2-stage washing and washing liquid separation type

Designed for 2-stage washing to enhance washing effectiveness or when using two types of washing liquids in the washing process. Used for separating and recovering the separated liquid, washing liquid I, and washing liquid II.

Economy: 3

Maintainability: 3

Disposal (Treatment) Volume: 3

Dehydration capability: 3

Solid washing: 5

Washing liquid separation: 4

Total: 21

About the evaluation criteria

Features
Dimensions
Specifications
Select another
product

Features

Dimensions

Type		Key Dimensions （mm)
Type		a	b	c	d	e	f	g	h
C20	H	928	485	99	344	725	790	570	1300
	HL	946	485	99	362	725	790	570	1300
	HLS	946	485	159	302	725	790	570	1300
C30	H	1153	600	75	478	1000	1000	735	1600
	HL	1181	600	75	506	1000	1000	735	1600
	HLS	1181	600	153	428	1000	1000	735	1600
	HL2	1213	600	75	538	1000	1000	735	1600
	HL2S	1213	600	153	460	1000	1000	735	1600
C40	H	1383	680	116	587	1350	1325	1000	1900
	HL	1411	680	116	615	1350	1325	1000	1900
	HLS	1411	680	228	503	1350	1325	1000	1900
	HL2	1443	680	116	647	1350	1325	1000	1900
	HL2S	1443	680	228	535	1350	1325	1000	1900
C55	H	1835	800	147	888	1568	1548	1200	2300
	HL	1835	800	147	888	1568	1548	1200	2300
	HLS	1835	800	273	762	1568	1548	1200	2300
	HL2	1887	800	147	940	1568	1548	1200	2300
	HL2S	1887	800	273	814	1568	1548	1200	2300

Type		Slurry input	Separated liquid Output	Washing fluid Output	Washing fluid1 Inlet	Washing fluid2 Inlet
Type		A	B	C	D	E
C20	H	25A	50A	—	—	—
	HL	25A	50A	—	15A	—
	HLS	25A	50A	50A	15A	—
C30	H	40A	65A	—	—	—
	HL	40A	65A	—	15A	—
	HLS	40A	65A	65A	15A	—
	HL2	25A	65A	—	15A	15A
	HL2S	25A	65A	65A	15A	15A
C40	H	40A	80A	—	—	—
	HL	40A	80A	—	15A	—
	HLS	40A	80A	80A	15A	—
	HL2	40A	80A	—	15A	15A
	HL2S	40A	80A	80A	15A	15A
C55	H	65A	200A	—	—	—
	HL	65A	200A	—	15A	—
	HLS	65A	200A	200A	15A	—
	HL2	65A	200A	—	15A	15A
	HL2S	65A	200A	200A	15A	15A

Specifications

Type		Primary Specifications
		Basket	Motor	Equipment mass	Main drive unit
		Inner diameter （mm）	（kW）	（kg）	Weight （kg）
C20	H	200	2.2	190	40
	HL	200	2.2	190	40
	HLS	200	2.2	190	40
C30	H	300	5.5	700	105
	HL	300	5.5	700	105
	HLS	300	5.5	700	105
	HL2	300	5.5	700	105
	HL2S	300	5.5	700	105
C40	H	400	15	1350	195
	HL	400	15	1350	195
	HLS	400	15	1350	195
	HL2	400	15	1350	195
	HL2S	400	15	1350	195
C55	H	550	30	2300	425
	HL	550	30	2300	425
	HLS	550	30	2300	425
	HL2	550	30	2300	425
	HL2S	550	30	2300	425

Type		Primary Specifications
		Designed load	Disposal(Treatment) Volume(Reference value)	Maximum centrifugal efficiency	Utilities (Reference value)
		（kN）	Separated liquid volume （m³/hr）	（G）	Seal air （Lit/min）
C20	H	5	1	1800	50〜100
	HL	5	1	1800	50〜100
	HLS	5	1	1800	50〜100
C30	H	20	3	1800	100〜200
	HL	20	3	1800	100〜200
	HLS	20	3	1800	100〜200
	HL2	20	3	1800	100〜200
	HL2S	20	3	1800	100〜200
C40	H	35	5.5	1800	100〜300
	HL	35	5.5	1800	100〜300
	HLS	35	5.5	1800	100〜300
	HL2	35	5.5	1800	100〜300
	HL2S	35	5.5	1800	100〜300
C55	H	60	11	1500	200〜500
	HL	60	11	1500	200〜500
	HLS	60	11	1500	200〜500
	HL2	60	11	1500	200〜500
	HL2S	60	11	1500	200〜500

Note 1: The treatment capacity of this machine is primarily determined by the separated liquid volume. The separated liquid volume, including washing liquids, may vary depending on the properties of the treated material. Please use the values as a reference for selecting a model.
Note 2: The centrifugal efficiency (500G - 1800G) and the treatment capacity are determined by test results or actual performance.
Note 3: Seal air is required to reduce the negative pressure inside the rotating bowl.
Shown are the reference values (at Normal) and these values may vary slightly depending on the pressure balance before and after separation.
Note 4: Standard material is SUS304. Depending on the properties of the treatment material, we also manufacture this machine in other materials, such as SUS316, SUS316L, Hastelloy, and titanium.
Note 5: Understanding the model type codes (e.g. C40HLS)
C40: Indicates model type and size. The number indicates the inner diameter of the basket base in centimeters.
HL: Indicates variation. In this case, HL indicates tall basket/1-stage washing.
S: Also indicates variation. S indicates it is a washing liquid separation type.