SEPARATOR / DEHYDRATOR

SEPARATOR / DEHYDRATOR

Guinard Centrifuge

HLS Type

1-stage washing and washing liquid separation type

Designed for separating and recovering solid washing liquid and separated liquid

Economy
3
Maintainability
3
Disposal (Treatment) Volume
4
Dehydration capability
4
Solid washing
4
Washing liquid separation
4
Total
22

Dimensions

Type Key
Dimensions
(mm)
a b c d e f g h
C20 H 928 485 99 344 725 790 570 1300
HL 946 485 99 362 725 790 570 1300
HLS 946 485 159 302 725 790 570 1300
C30 H 1153 600 75 478 1000 1000 735 1600
HL 1181 600 75 506 1000 1000 735 1600
HLS 1181 600 153 428 1000 1000 735 1600
HL2 1213 600 75 538 1000 1000 735 1600
HL2S 1213 600 153 460 1000 1000 735 1600
C40 H 1383 680 116 587 1350 1325 1000 1900
HL 1411 680 116 615 1350 1325 1000 1900
HLS 1411 680 228 503 1350 1325 1000 1900
HL2 1443 680 116 647 1350 1325 1000 1900
HL2S 1443 680 228 535 1350 1325 1000 1900
C55 H 1835 800 147 888 1568 1548 1200 2300
HL 1835 800 147 888 1568 1548 1200 2300
HLS 1835 800 273 762 1568 1548 1200 2300
HL2 1887 800 147 940 1568 1548 1200 2300
HL2S 1887 800 273 814 1568 1548 1200 2300
Type Slurry
input
Separated liquid
Output
Washing fluid
Output
Washing fluid1
Inlet
Washing fluid2
Inlet
A B C D E
C20 H 25A 50A
HL 25A 50A 15A
HLS 25A 50A 50A 15A
C30 H 40A 65A
HL 40A 65A 15A
HLS 40A 65A 65A 15A
HL2 25A 65A 15A 15A
HL2S 25A 65A 65A 15A 15A
C40 H 40A 80A
HL 40A 80A 15A
HLS 40A 80A 80A 15A
HL2 40A 80A 15A 15A
HL2S 40A 80A 80A 15A 15A
C55 H 65A 200A
HL 65A 200A 15A
HLS 65A 200A 200A 15A
HL2 65A 200A 15A 15A
HL2S 65A 200A 200A 15A 15A

Specifications

Type Primary Specifications
Basket Motor Equipment
mass
Main drive
unit
Inner diameter
(mm)
(kW) (kg) Weight
(kg)
C20 H 200 2.2 190 40
HL 200 2.2 190 40
HLS 200 2.2 190 40
C30 H 300 5.5 700 105
HL 300 5.5 700 105
HLS 300 5.5 700 105
HL2 300 5.5 700 105
HL2S 300 5.5 700 105
C40 H 400 15 1350 195
HL 400 15 1350 195
HLS 400 15 1350 195
HL2 400 15 1350 195
HL2S 400 15 1350 195
C55 H 550 30 2300 425
HL 550 30 2300 425
HLS 550 30 2300 425
HL2 550 30 2300 425
HL2S 550 30 2300 425
Type Primary Specifications
Designed load Disposal
(Treatment)
Volume
(Reference value)
Maximum
centrifugal efficiency
Utilities
(Reference value)
(kN) Separated liquid volume
(m3/hr)
(G) Seal air
(Lit/min)
C20 H 5 1 1800 50〜100
HL 5 1 1800 50〜100
HLS 5 1 1800 50〜100
C30 H 20 3 1800 100〜200
HL 20 3 1800 100〜200
HLS 20 3 1800 100〜200
HL2 20 3 1800 100〜200
HL2S 20 3 1800 100〜200
C40 H 35 5.5 1800 100〜300
HL 35 5.5 1800 100〜300
HLS 35 5.5 1800 100〜300
HL2 35 5.5 1800 100〜300
HL2S 35 5.5 1800 100〜300
C55 H 60 11 1500 200〜500
HL 60 11 1500 200〜500
HLS 60 11 1500 200〜500
HL2 60 11 1500 200〜500
HL2S 60 11 1500 200〜500
  • Note 1: The treatment capacity of this machine is primarily determined by the separated liquid volume. The separated liquid volume, including washing liquids, may vary depending on the properties of the treated material. Please use the values as a reference for selecting a model.
  • Note 2: The centrifugal efficiency (500G - 1800G) and the treatment capacity are determined by test results or actual performance.
  • Note 3: Seal air is required to reduce the negative pressure inside the rotating bowl.
    Shown are the reference values (at Normal) and these values may vary slightly depending on the pressure balance before and after separation.
  • Note 4: Standard material is SUS304. Depending on the properties of the treatment material, we also manufacture this machine in other materials, such as SUS316, SUS316L, Hastelloy, and titanium.
  • Note 5: Understanding the model type codes (e.g. C40HLS)
    C40: Indicates model type and size. The number indicates the inner diameter of the basket base in centimeters.
    HL: Indicates variation. In this case, HL indicates tall basket/1-stage washing.
    S: Also indicates variation. S indicates it is a washing liquid separation type.