Publications: Haruyama, D.; Onodera, S.; Okabe, T.: Micromechanics modeling of tensile/shear behavior and crack density of composite materials, ICCM International Conferences on Composite Materials

Publications: Inoue, M.; Takai, Y.; Yanagihara, M.; Durmaz, M.; Kara, A.; Kroon, I.B.: Active protection system for Main cable of suspension bridge against HGV or Hazardous material fires, IABSE Symposium, Guimaraes 2019: Towards a Resilient Built Environment Risk and Asset Management - Report, 2019, pp. 131-137

Publications: Akikubo, K.; Kawaguchi, N.; Tachibana, M.: Synthesis of metal oxide nanowall structures using a carbon nanowall template, Japanese Journal of Applied Physics, Vol. 58, No. 9, 2019

Publications: Suzuki, T.; Fukushige, S.; Tsunori, M.: Load path visualization for fiber trajectory optimization of additive manufacturing composites, ICCM International Conferences on Composite Materials

Publications: Komeda, M.; Nie, J.; Ono, K.; Miyashita, T.; Okada, S.: An experimental study on buckling behavior of cruciform columns made of SBHS400, Proceedings of the International Offshore and Polar Engineering Conference, Vol. 4, 2019, pp. 4816-4822

Publications: Shioda, Y.; Nakagawa, H.; Nomura, K.; Yamazaki, N.; Kubushiro, K.: CREEP DAMAGE ASSESSMENT OF 47NI-23CR-23FE-7W ALLOY, Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials - Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials, 2019, pp. 592-602

Publications: Matsuura, K.; Matsui, K.; Tani, N.; Goto, T.: Interaction of wake disturbance with compressible transitional boundary layers in a low-pressure turbine ascade under rotor-stator interaction, Energy Procedia, Vol. 160, 2019, pp. 68-75

Publications: Ito, S.; Uchida, M.; Fujimori, T.; Kobayashi, H.: NOx emission of two-stage combustor for ammonia/natural gas Co-fired gas turbine, 12th Asia-Pacific Conference on Combustion, ASPACC 2019, 2019

Publications: Takanashi, M.; Ueda, H.; Saito, T.; Ogawa, T.; Hayashi, K.: Discussion on crack growth behavior in large-scale fatigue tests of carbon and low-alloy steel plates based on fracture surface observation, Procedia Structural Integrity, Vol. 19, 2019, pp. 275-283

Publications: Otani, A.; Nakamura, I.; Watakabe, T.; Morishita, M.; Shibutani, T.; Shiratori, M.: Applicability of seismic fatigue evaluation by JSME code case, NC-CC-008, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 8, 2019

Publications: Kim, J.-H.; Eguchi, H.; Umemura, M.; Ishikawa, Y.: Hybrid metal complex nanocomposites for targeted cancer diagnosis and therapeutics, Materials for Biomedical Engineering: Inorganic Micro- and Nanostructures, 2019, pp. 427-461

Publications: Takada, K.; Yoshizawa, S.; Tsukui, T.; Saito, T.: Multipath error reduction for underwater acoustic direction of arrival estimation, OCEANS 2019 MTS/IEEE Seattle, OCEANS 2019, 2019

Publications: Ozasa, H.; Asakawa, E.; Murakami, F.; Hondori, E.J.; Takekawa, J.; Mikada, H.: Realization of high signal-to-noise ratio offshore seismic survey with interferometric approach, 2018 SEG International Exposition and Annual Meeting, SEG 2018, 2019, pp. 4211-4215

Publications: Asada, S.; Zhang, S.; Takanashi, M.; Nomura, Y.: Study on incorporation of a new design fatigue curve into the JSME environmental fatigue evaluation method, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 3, 2019

Publications: Mihara, R.: Net shape HIP technology for rocket engine parts, Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 66, No. 8, 2019, pp. 391-394 (in Japanese)

Publications: Morii, T.; Tanaka, Y.; Watanabe, S.; Ohashi, S.; Matsunaga, Y.: Experimental investigation on suction performance and cavitation instabilities of turbopumps with two different inducers, IOP Conference Series: Earth and Environmental Science, Vol. 240, No. 3, 2019

Publications: Abe, D.; Murakami, Y.; Matsuoka, T.: Welding technology for A-USC boiler, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 88, No. 4, 2019, pp. 252-256 (in Japanese)

Publications: Ichinose, A.; Takeda, T.; Miyagawa, K.; Ogawa, Y.; Negishi, H.; Niiyama, K.: Unsteady flow in the vaned diffuser of a low specific speed centrifugal pump with an unshrouded impeller, ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019, Vol. 3, 2019

Publications: Kohzai, M.; Yokokawa, Y.; Takaishi, T.; Ito, Y.; Yamamoto, K.; Omotani, H.; Kato, T.; Hirai, T.: Flap surface pressure measurements with 3D printed pressure belts in FQUROH flight demonstration, AIAA Scitech 2019 Forum, 2019

Publications: Sakakibara, Y.; Shinozaki, I.; Nakayama, G.; Nan-Nichi, T.; Fujii, T.; Shimamura, Y.; Tohgo, K.: Monte carlo simulation based on scc test results in hydrogenated steam environment for alloy 600, Minerals, Metals and Materials Series, 2019, pp. 1551-1561

Publications: Nishi, T.; Ohnuma, K.; Tanaka, K.; Manako, T.; Yamato, Y.; Ohta, H.; Sukenaga, S.; Shibata, H.; Kakihara, T.: Thermal conductivities of alkali–silicate and calcium–alkali–silicate melts, Journal of Non-Crystalline Solids, Vol. 511, 2019, pp. 36-40

Publications: Shibuya, Y.; Oyori, H.; Sugawara, H.; Seki, N.: Flight Optimization Model on Global and Interval Ranges for Conceptual Studies of MEA Systems, SAE Technical Paper 2019-01-1906

Publications: Doi, Y.; Ji, Y.; Tamura, Y.; Ikeda, Y.; Umemura, A.; Kaneshima, Y.; Murakami, H.; Yamashita, A.; Asama, H.: Robust path planning against pose errors for mobile robots in rough terrain, Advances in Intelligent Systems and Computing, Vol. 867, 2019, pp. 27-39

Publications: Takanashi, M.; Ueda, H.; Saito, T.; Ogawa, T.; Hayashi, K.: Development of new design fatigue curves in Japan: Discussion of crack growth behavior in large-scale fatigue tests of carbon and low-alloy steel plates, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 3, 2019

Publications: Adachi, T.; Seki, N.; Oyori, H.; Muraoka, M.: Energy Recovery Rate from an Electric Air-Cycle System under the Cruising Altitude and Speed, SAE Technical Paper 2019-01-1905

Publications: Nomura, K.; Kubushiro, K.; Nakagawa, H.; Nishimoto, Y.; Yamaguchi, T.; Mihune, H.: ESTABLISHING INDUCTION BENDING TECHNIQUE FOR NI-BASED ALLOY HR6W LARGE PIPING, Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials - Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials, 2019, pp. 869-879

Publications: Tamaki, H.: A Study on Matching between Centrifugal Compressor Impeller and Low Solidity Diffuser and Its Extension to Vaneless Diffuser, Journal of Engineering for Gas Turbines and Power, Vol. 141, No. 4, 2019

Publications: Kusaka, K.; Shirasaka, K.; Yonekura, D.; Tanaka, Y.: Residual stress measurement of {112}-oriented CrN layers in CrN/Cr multilayer films, Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics, Vol. 37, No. 6, 2019

Publications: Sato, H.; Ueda, Y.; Andoh, M.; Honda, T.: Validation of fracture prediction model to design CMC turbine vane, Proceedings of the ASME Turbo Expo, Vol. 6, 2019

Publications: Jin, Y.; Sugimoto, N.; Nishizawa, T.; Yoshitomi, T.; Sawada, A.; Sarae, W.; Hattori, A.; Yamasaki, Y.; Okamoto, H.; Sato, K.: Measurement of water mist particle size generated by rocket launch using a two-wavelength multi-static lidar, Applied Optics, Vol. 58, No. 23, 2019, pp. 6274-6279

Publications: Ito, G.; Kawashima, R.; Komurasaki, K.; Koizumi, H.: Inflow angular dependence of the capture coefficient in cryopumps, Vacuum, Vol. 160, 2019, pp. 102-108

Publications: Takehisa, Y.; Mitsuru, O.: Application of damage model based on void growth analysis to ductile crack growth simulation, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 37, No. 3, 2019, pp. 115-124 (in Japanese)

Publications: Okita, Y.; Mizokami, Y.; Hasegawa, J.: Erosion testing of environmental-barrier-coated CMC and its behavior on an aero-engine turbine vane under particle-laden hot gas stream, Proceedings of the ASME Turbo Expo, Vol. 2, 2019

Publications: Takai, R.; Yoshida, M.: Hot tearing prediction of casting via thermal stress analysis, Keikinzoku/Journal of Japan Institute of Light Metals, Vol. 69, No. 8, 2019, pp. 400-409 (in Japanese)

Publications: Ishii, T.; Nagai, K.; Oinuma, H.; Oishi, T.; Ishii, Y.: Jet noise reduction of turbofan engine by notched nozzle, INTER-NOISE 2019 MADRID - 48th International Congress and Exhibition on Noise Control Engineering, 2019

Publications: Shiomi, K.: Study on seismic designs controlling locations of failure inside steel frame structures under severe ground motions, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 8, 2019

Publications: Yamada, T.; Ohata, M.: Proposal of ductile damage model based on unit cell analysis for prediction of ductile crack growth resistance of cracked component, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 3, 2019

Publications: Fujimori, T.; Watanabe, H.: R&D of combustion simulation platform for advanced industrial design processes by academia-industry cooperation, 12th Asia-Pacific Conference on Combustion, ASPACC 2019, 2019

Publications: Ako, Y.; Takahashi, Y.; Fujiwara, K.; Jikumaru, T.: Deterioration of magnetic property of permendur due to laminating process for improvement of power density in permanent magnet motors, International Journal of Applied Electromagnetics and Mechanics, Vol. 61, No. 1, 2019, pp. S97-S106

Publications: Kushida, S.; Asada, K.; Fujii, K.; Tatsukawa, T.; Sakamoto, K.: Some consideration on the aerodynamic design of blast wave simulator using a shock tube system, ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019, Vol. 1, 2019

Publications: Hirohata, M.; Takeda, F.; Inose, K.; Matsumoto, N.; Daisuke, A.B.E.: Mechanical evaluation on cold cracking of laser-arc hybrid welding by restraint strain, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 37, No. 1, 2019, pp. 68-80 (in Japanese)

Publications: Lu, K.; Katsuyama, J.; Li, Y.; Miyamoto, Y.; Itabashi, Y.; Suzuki, M.; Hirota, T.; Nagai, M.; Kanto, Y.: Verification of a probabilistic fracture mechanics code PASCAl4 for reactor pressure vessesls, International Conference on Nuclear Engineering, Proceedings, ICONE

Publications: Ozasa, H.; Asakawa, E.; Murakami, F.; Hondori, E.J.; Takekawa, J.; Mikada, H.: Survey performance of deeply-towed marine seismic vibrator–Comparative Study with imaging results from an airgun array, SEG Technical Program Expanded Abstracts, 2019, pp. 57-61

Publications: Prayitno, Y.A.K.; Iso, Y.; Zhao, T.; Takei, M.: Distribution of particle sedimentation thickness in rotating separation system using wireless electrical resistance detector, International Conference on Nuclear Engineering, Proceedings, ICONE

Publications: Kai, S.; Otani, A.: Failure modes of piping systems under seismic loading and evaluation, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 8, 2019

Publications: Ishikawa, A.; Liu, Z.; Zhang, H.; Chen, Q.: Energy Storage By Sand in Fluidized BED, Fluidization XVI, 2019, pp. 331-332

Publications: Ohuchida, S.; Seo, S.; Okita, Y.: A steady state thermal prediction method for ship board turbocharger and its validation with experiments, Proceedings of the ASME Turbo Expo, Vol. 5, 2019

Publications: Kusaka, K.; Shirasaka, K.; Yonekura, D.; Tanaka, Y.: Measurement of the residual stress in chromium nitride coatings deposited on an aluminum alloy substrate using arc ion plating method, Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics, Vol. 37, No. 6, 2019

Publications: Ito, S.; Kanda, K.: The first practical full-HD cryogenic tank visualization system in the world, IGT International Liquefied Natural Gas Conference Proceedings, Vol. 2, 2019

Publications: Nakayama, G.: Corrosion resistance of the weld, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 88, No. 7, 2019, pp. 554-561 (in Japanese)

Publications: Park, J.-H.; Yang, C.-S.; Harun-Al-Rashid, A.; Ouchi, K.: Removal of different types of noises in synthetic aperture radar (SAR) images for improved ship detection, International Geoscience and Remote Sensing Symposium (IGARSS)

Publications: Kanno, N.; Higashi, M.; Ozaki, T.; Tsuno, N.; Yamane, K.; Takahashi, S.: EFFECT OF PRIOR PARTICLE BOUNDARY ON DEFORMABILITY OF POWDER PROCESSED TURBINE DISK ALLOY, Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials - Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials, 2019, pp. 470-478

Publications: Terao, Y.; Ishida, Y.; Ohsaki, H.; Oyori, H.: Electromagnetic Characteristic Comparison of Superconducting Synchronous Motor Characteristics for Electric Aircraft Propulsion Systems, SAE Technical Paper 2019-01-1912

Publications: Ura, H.; Shigemi, M.; Hirotani, T.; Homma, T.: A method of wall interference correction for kevlar wall test section, 25th AIAA/CEAS Aeroacoustics Conference, 2019, 2019

Publications: Takakura, D.; Fukazawa, H.; Tsunori, M.: Ross-sectional mapping of residual stresses using the contour method, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 88, No. 6, 2019, pp. 472-475 (in Japanese)

Publications: Sato, N.; Ueno, S.-I.; Ohno, E.; Tamura, M.; Ueki, Y.; Yoshiie, R.; Naruse, I.: Effects of mechanical stresses around single tube on ash shedding in pulverized coal combustor, Proceedings of the Combustion Institute, Vol. 37, No. 3, 2019, pp. 2875-2882

Publications: Ikaida, H.; Yamashiro, R.; Hara, T.; Ui, K.; Imoto, T.; Nanba, K.; Maeda, K.; Yoshie, Y.: Epsilon's development and launch for multiple small satellites mission, Proceedings of the International Astronautical Congress, IAC

Publications: Koga, S.; Tamura, M.; Kimoto, K.: Development of low-cost hypergolic propulsion systems in IHI aerospace, Proceedings of the International Astronautical Congress, IAC

Publications: Sato, K.; Hanada, M.; Yoshimura, Y.; Hanada, T.; Izumiyama, T.; Shinohara, R.: The optimal collision avoidance maneuver with multiple objects in Geo, Proceedings of the International Astronautical Congress, IAC

Publications: Kojima, T.; Sugahara, M.; Shirouchi, Y.; Fukumoto, H.; Iwata, A.; Oyori, H.: Gradationally Controlled Voltage Inverter for More Electric Aircrafts, SAE Technical Paper 2019-01-1913

Publications: Ise, T.; Fujimoto, T.; Hoshino, T.; Sakamoto, M.; Yagi, K.; Imoto, T.: The first ride-share mission for epsilon launch vehicle and its future plans, Proceedings of the International Astronautical Congress, IAC

Publications: Yamada, T.; Ohata, M.: Application of damage model based on void growth analysis to ductile crack growth simulation, Welding International, Vol. 33, No. 1-3, 2019, pp. 30-41

Publications: Yamashita, Y.; Murakami, T.; Akizuki, Y.: Crack growth arrester using "gourd-shaped-insert-plate", Procedia Structural Integrity, Vol. 19, 2019, pp. 123-129

Publications: Morita, Y.; Yamashiro, R.; Yamaguchi, H.; Tanaka, K.; Ohtsuka, H.: Innovative guidance and control design of the versatile orbit transfer space vehicle of the epsilon rocket, Advances in the Astronautical Sciences, Vol. 168, 2019, pp. 1425-1432

Publications: Nagaya, S.: Development of floating type ocean current power generation, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 88, No. 1, 2019, pp. 63-66 (in Japanese)

Publications: Obuchi, K.; Watanabe, F.; Kuroki, H.; Arai, K.: Impact of foreign object damage to leading edge on fatigue capability of CMC turbine vanes, Proceedings of the ASME Turbo Expo, Vol. 6, 2019

Publications: Tanaka, Y.; Kubushiro, K.: ANISOTROPIC MECHANICAL PROPERTIES OF EBM MANUFACTURED ALLOY 718, Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials - Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials, 2019, pp. 836-841