Publications

Tamura, M.; Gotou, T.; Ishii, H.; Riechelmann, D.: Experimental investigation of ammonia combustion in a bench scale 1.2 MW-thermal pulverised coal firing furnace, Applied Energy, Vol. 277, 2020

Publications

Zhang, J.; Ito, T.; Ishii, H.; Ishihara, S.; Fujimori, T.: Numerical investigation on ammonia co-firing in a pulverized coal combustion facility: Effect of ammonia co-firing ratio, Fuel, Vol. 267, 2020

Publications

Ishihara, S.; Zhang, J.; Ito, T.: Numerical calculation with detailed chemistry on ammonia co-firing in a coal-fired boiler: Effect of ammonia co-firing ratio on NO emissions, Fuel, Vol. 274, 2020

Publications

Ishihara, S.; Zhang, J.; Ito, T.: Numerical calculation with detailed chemistry of effect of ammonia co-firing on NO emissions in a coal-fired boiler, Fuel, Vol. 266, 2020

Publications

Higashi, M.; Ozaki, T.: Selective laser melting of pure molybdenum: Evolution of defect and crystallographic texture with process parameters, Materials and Design, Vol. 191, 2020

Publications

Ho, H.-J.; Iizuka, A.; Shibata, E.; Tomita, H.; Takano, K.; Endo, T.: CO₂ utilization via direct aqueous carbonation of synthesized concrete fines under atmospheric pressure, ACS Omega, Vol. 5, No. 26, 2020, pp. 15877-15890

Publications

Kishimoto, M.; Muroyama, H.; Suzuki, S.; Saito, M.; Koide, T.; Takahashi, Y.; Horiuchi, T.; Yamasaki, H.; Matsumoto, S.; Kubo, H.; Takahashi, N.; Okabe, A.; Ueguchi, S.; Jun, M.; Tateno, A.; Matsuo, T.; Matsui, T.; Iwai, H.; Yoshida, H.; Eguchi, K.: Development of 1 kW-class Ammonia-fueled Solid Oxide Fuel Cell Stack, Fuel Cells, Vol. 20, No. 1, 2020, pp. 80-88

Publications

Rahimi, M.; Diederichsen, K.M.; Ozbek, N.; Wang, M.; Choi, W.; Hatton, T.A.: An Electrochemically Mediated Amine Regeneration Process with a Mixed Absorbent for Postcombustion CO₂ Capture, Environmental Science and Technology, Vol. 54, No. 14, 2020, pp. 8999-9007

Publications

Zok, F.W.; Maxwell, P.T.; Kawanishi, K.; Callaway, E.B.: Degradation of a SiC-SiC composite in water vapor environments, Journal of the American Ceramic Society, Vol. 103, No. 3, 2020, pp. 1927-1941

Publications

Suzuki, T.; Fukushige, S.; Tsunori, M.: Load path visualization and fiber trajectory optimization for additive manufacturing of composites, Additive Manufacturing, Vol. 31, 2020

Publications

Masoomi, I.; Kamata, H.; Yukimura, A.; Ohtsubo, K.; Schmid, M.O.; Scheffknecht, G.: Investigation on the behavior of mercury across the flue gas treatment of coal combustion power plants using a lab-scale firing system, Fuel Processing Technology, Vol. 201, 2020

Publications

Jiang, B.; Doi, K.; Tsuchiya, K.; Kawano, Y.; Kori, A.; Ikushima, K.: Micromechanical properties of steel corrosion products in concrete studied by nano-indentation technique, Corrosion Science, Vol. 163, 2020

Publications

Higashi, M.; Kanno, N.: Effect of initial powder particle size on the hot workability of powder metallurgy Ni-based superalloys, Materials and Design, Vol. 194, 2020

Publications

Ishikawa, S.; Tanaka, K.; Yano, D.; Kijimoto, S.: Design of a disc-shaped viscoelastic damping material attached to a cylindrical pipe as a dynamic absorber or Houde damper, Journal of Sound and Vibration, Vol. 475, 2020

Publications

Kamps, L.; Hirai, S.; Sakurai, K.; Viscor, T.; Saito, Y.; Guan, R.; Isochi, H.; Adachi, N.; Itoh, M.; Nagata, H.: Investigation of graphite nozzle erosion in hybrid rockets using oxygen/high-density polyethylene, Journal of Propulsion and Power, Vol. 36, No. 3, 2020, pp. 423-434

Publications

Yamazaki, Y.; Sugaya, R.; Kobayashi, U.; Ohta, Y.: Effects of thermal cycling and microstructure on the fatigue crack propagation in forged titanium–aluminide alloys under thermomechanical fatigue conditions, Materials Science and Engineering: A, Vol. 797, 2020

Publications

Liu, Y.; Kamata, H.; Ohara, H.; Izumi, Y.; Ong, D.S.W.; Chang, J.; Poh, C.K.; Chen, L.; Borgna, A.: Low-Olefin Production Process Based on Fischer-Tropsch Synthesis: Process Synthesis, Optimization, and Techno-Economic Analysis, Industrial and Engineering Chemistry Research, Vol. 59, No. 18, 2020, pp. 8728-8739

Publications

Yamaguchi, K.; Katsura, K.; Yamada, T.; Sato, Y.: Criteria for using antiparallel SiC SBDs with SiC mosfets for SiC-Based Inverters, IEEE Transactions on Power Electronics, Vol. 35, No. 1, 2020, pp. 619-629

Publications

Wanjara, P.; Gholipour, J.; Watanabe, E.; Watanabe, K.; Sugino, T.; Patnaik, P.; Sikan, F.; Brochu, M.: High Frequency Vibration Fatigue Behavior of Ti6Al4V Fabricated by Wire-Fed Electron Beam Additive Manufacturing Technology, Advances in Materials Science and Engineering, Vol. 2020

Publications

SUN, Z.; WANG, B.; ZHENG, X.; KAWAKUBO, T.; TAMAKI, H.; NUMAKURA, R.: Effect of bent inlet pipe on the flow instability behavior of centrifugal compressors, Chinese Journal of Aeronautics, Vol. 33, No. 8, 2020, pp. 2099-2109

Publications

Akikubo, K.; Kurahashi, T.; Kawaguchi, S.; Tachibana, M.: Thermal expansion measurements of nano-graphite using high-temperature X-ray diffraction, Carbon, Vol. 169, 2020, pp. 307-311

Publications

Funaki, I.; Cho, S.; Sano, T.; Fukatsu, T.; Tashiro, Y.; Shiiki, T.; Nakamura, Y.; Watanabe, H.; Kubota, K.; Matsunaga, Y.; Fuchigami, K.: Development of a 6-kW-class Hall thruster for geostationary missions, Acta Astronautica, Vol. 170, 2020, pp. 163-171

Publications

Shiraiwa, T.; Ishikawa, K.; Enoki, M.; Shinozaki, I.; Kanazawa, S.: Acoustic emission analysis using Bayesian model selection for damage characterization in ceramic matrix composites, Journal of the European Ceramic Society, Vol. 40, No. 8, 2020, pp. 2791-2800

Publications

Maung, C.O.; Kawashima, D.; Oshima, H.; Tanaka, Y.; Yamane, Y.; Takei, M.: Particle volume flow rate measurement by combination of dual electrical capacitance tomography sensor and plug flow shape model, Powder Technology, Vol. 364, 2020, pp. 310-320

Publications

Prayitno, Y.A.K.; Zhao, T.; Iso, Y.; Takei, M.: In situ measurement of sludge thickness in high-centrifugal force by optimized particle resistance normalization for wireless electrical resistance detector (WERD), Measurement Science and Technology, Vol. 32, No. 3, 2020

Publications

Poh, C.K.; Ong, S.W.D.; Du, Y.; Kamata, H.; Choong, K.S.C.; Chang, J.; Izumi, Y.; Nariai, K.; Mizukami, N.; Chen, L.; Borgna, A.: Direct methanation with supported MoS2 nano-flakes: Relationship between structure and activity, Catalysis Today, Vol. 342, 2020, pp. 21-31

Publications

Kamaya, M.; Sakakibara, Y.; Yoda, R.; Suzuki, S.; Morita, H.; Kobayashi, D.; Yamagiwa, K.; Nishioka, T.; Maekawa, Y.; Tanakamaru, T.; Nagashima, H.; Ohtani, T.: A round robin EBSD measurement for quantitative assessment of small plastic strain, Materials Characterization, Vol. 170, 2020

Publications

Kadoi, K.; Nakata, Y.; Inoue, H.; Saruwatari, S.: Relationship between solidification sequence and toughness of carbon steel weld metal, Materials Characterization, Vol. 165, 2020

Publications

Hasegawa, S.; Hiroki, A.; Ohta, Y.; Iimura, N.; Fukaya, A.; Maekawa, Y.: Thermally stable graft-type polymer electrolyte membranes consisting based on poly (ether ether ketone) and crosslinked graft-polymers for fuel cell applications, Radiation Physics and Chemistry, Vol. 171, 2020

Publications

Fujiwara, K.; Sriram, R.; Kontis, K.: Experimental investigations on the sharp leading-edge separation over a flat plate at zero incidence using particle image velocimetry, Experiments in Fluids, Vol. 61, No. 9, 2020

Publications

Sawada, K.; Sekido, K.; Kimura, K.; Arisue, K.; Honda, M.; Komai, N.; Fukuzawa, N.; Ueno, T.; Shimohata, N.; Nakatomi, H.; Takagi, K.; Kimura, T.; Nomura, K.; Kubushiro, K.: Effect of initial microstructure on creep strength of ASME grade T91 steel, ISIJ International, Vol. 60, No. 2, 2020, pp. 382-391

Publications

Mehmanparast, A.; Yatomi, M.; Biglari, F.; Maleki, S.; Nikbin, K.: Experimental and numerical investigation of the weld geometry effects on Type IV cracking behaviour in P91 steel, Engineering Failure Analysis, Vol. 117, 2020

Publications

Hatsugai, T.; Nakayama, R.; Tomura, S.; Akiyoshi, R.; Nishitsuka, S.; Nakamura, R.; Takeya, S.; Ohmura, R.: Development and Continuous Operation of a Bench-Scale System for the Production of O3 + O2 + CO₂ Hydrates, Chemical Engineering and Technology, Vol. 43, No. 11, 2020, pp. 2307-2314

Publications

Saiki, T.; Mimasu, Y.; Takei, Y.; Yamada, M.; Sawada, H.; Ogawa, K.; Ogawa, N.; Takeuchi, H.; Miura, A.; Shimaki, Y.; Wada, K.; Honda, R.; Yokota, Y.; Shirai, K.; Sano, N.; Ohtsuka, H.; Ono, G.; Yoshikawa, K.; Kikuchi, S.; Hirose, C.; Yamamoto, Y.; Iwata, T.; Arakawa, M.; Sugita, S.; Tanaka, S.; Terui, F.; Yoshikawa, M.; Nakazawa, S.; Watanabe, S.-I.; Tsuda, Y.: Motion reconstruction of the small carry-on impactor aboard Hayabusa2, Astrodynamics, Vol. 4, No. 4, 2020, pp. 289-308

Publications

Shima, K.; Funato, Y.; Sato, N.; Fukushima, Y.; Momose, T.; Shimogaki, Y.: Porous Membranes as Sacrificial Layers Enabling Conformal Chemical Vapor Deposition Involving Multiple Film-Forming Species, ACS Applied Materials and Interfaces, Vol. 12, No. 45, 2020, pp. 51016-51025

Publications

Sato, N.; Funato, Y.; Fukushima, Y.; Momose, T.; Koshi, M.; Shimogaki, Y.: Modeling of the elementary gas-phase reaction during chemical vapor deposition of silicon carbide from CH3SiCl3/H2, International Journal of Chemical Kinetics, Vol. 52, No. 6, 2020, pp. 359-367

Publications

Ito, T.; Yamamoto, T.; Nakamura, T.; Habu, H.; Ohtsuka, H.: Sounding rocket SS-520 as a CubeSat launch vehicle, Acta Astronautica, Vol. 170, 2020, pp. 206-223

Publications

Okita, Y.; Mizokami, Y.; Hasegawa, J.: Erosion testing of environmental barrier-coated ceramic matrix composite and its behavior on an aero-engine turbine vane under particle-laden hot gas stream, Journal of Turbomachinery, Vol. 142, No. 6, 2020

Publications

Kubota, Y.; Yoko, K.; Fujita, T.; Inoue, R.; Kogo, Y.: Thermal protection performance of polymethylmethacrylate-impregnated porous carbon materials with three different densities, Journal of Spacecraft and Rockets, Vol. 57, No. 5, 2020, pp. 985-994

Publications

Higashi, M.; Ozaki, T.; Moronaga, T.; Hara, T.; Osada, T.; Kawagishi, K.: Microstructural characteristics of laser surface melted MoSiBTiC alloy, Materials Letters, Vol. 278, 2020

Publications

Okita, Y.; Ideta, T.; Fujimoto, S.: Multi-objective shape optimization of arrowhead-shaped film cooling hole on transonic turbine blade, Proceedings of the ASME Turbo Expo, Vol. 7, 2020

Publications

Asada, S.; Zhang, S.; Takanashi, M.; Nomura, Y.: Study on incorporation of new design fatigue curves and a new environmental fatigue correction factor for pwr environment into the jsme environmental fatigue evaluation method, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 1, 2020

Publications

Murata, Y.; Sato, Y.; Sakal, M.; Kuwahara, T.; Fujita, S.; Kawasoe, Y.; Shinohara, R.; Izumiyama, T.: Ground Evaluation of the Attitude Control System of 3U-CubeSat IHI-SAT, Proceedings of the 2020 IEEE/SICE International Symposium on System Integration, SII 2020, 2020, pp. 771-776

Publications

Shimizu, W.; Kanno, Y.: A note on accelerated proximal gradient method for elastoplastic analysis with tresca yield criterion, Journal of the Operations Research Society of Japan, Vol. 63, No. 3, 2020, pp. 78-92

Publications

Takamizawa, H.; Nishiyama, Y.; Hirano, T.: Bayesian uncertainty evaluation of charpy ductile-to-brittle transition temperature for reactor pressure vessel steels, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 1, 2020

Publications

Ishizuka, N.; Yamada, T.; Izui, K.; Nishiwaki, S.: Topology optimization for unifying deposit thickness in electroplating process, Structural and Multidisciplinary Optimization, Vol. 62, No. 4, 2020, pp. 1767-1785

Publications

Tsuboi, Y.; Kumagai, Y.; Suda, T.; Hayashi, J.-I.: Segregation of char and silica sand particles in a hot-fluidized-bed steam gasifier, Advanced Powder Technology, Vol. 31, No. 2, 2020, pp. 867-874

Publications

Adziman, F.; Takai, R.; Tang, Y.T.; Ishikawa, S.; Barba, D.; Alabort, E.; Nemeth, A.; Kanno, N.; Reed, R.: On Optimising Ring-Rolling Manufacturability of C&W Nickel Superalloys for Aero-engine Turbine Disc, Minerals, Metals and Materials Series, 2020, pp. 408-420

Publications

Zhang, W.; Fujisawa, N.; Ohta, Y.; Goto, T.; Kato, D.: Rotor performance of an axial flow compressor at free and highly loaded windmilling conditions, International Journal of Gas Turbine, Propulsion and Power Systems, Vol. 11, No. 2, 2020, pp. 17-26

Publications

Watanabe, H.; Cho, S.; Kubota, K.; Ito, G.; Fuchigami, K.; Uematsu, K.; Tashiro, Y.; Iihara, S.; Funaki, I.: Performance evaluation of a two-kilowatt magnetically shielded hall thruster, Journal of Propulsion and Power, Vol. 36, No. 1, 2020, pp. 14-24

Publications

Kim, D.C.; Ogura, T.; Tanabe, Y.; Yamashita, S.; Saida, K.: Hot cracking susceptibility and solidification segregation analysis by computer simulation in duplex stainless steels, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 38, No. 2, 2020, pp. 76-84 (in Japanese)

Publications

Le Duc, D.; Nguyen Huu, L.; Nguyen Hong, N.; Ohno, E.; Kozaki, T.; Ishii, H.: Experimental investigation of combustion characteristics of woody biomass grown in Vietnam, Journal of Mechanical Engineering Research and Developments, Vol. 43, No. 1, 2020, pp. 217-227

Publications

Ozasa, H.; Asakawa, E.; Murakami, F.; Hondori, E.J.; Takekawa, J.; Mikada, H.: Survey performance of deeply-towed marine seismic vibrator-Comparative Study with imaging results from an airgun array, SEG International Exposition and Annual Meeting 2019, 2020, pp. 57-61

Publications

Liu, Y.; Ohara, H.: Lignite drying in a bench-scale pulsation-assisted fluidized bed dryer, Drying Technology, Vol. 38, No. 13, 2020, pp. 1698-1708

Publications

Yamazaki, N.; Nomura, K.; Kubushiro, K.: Creep-fatigue damage for boiler header stub mock-up specimen of 47Ni-23Cr-23Fe-7W alloy, Materials Transactions, Vol. 61, No. 6, 2020, pp. 1109-1114

Publications

Yamauchi, T.; Hirogaki, T.; Aoyama, E.; Takahashi, K.: In-situ modification of position and posture motion of AN industrial robot to recreate space technology in a pipe joint manufacturing system with the laser trucker sensor, International Journal of Mechanical Engineering and Robotics Research, Vol. 9, No. 3, 2020, pp. 378-386

Publications

Kimura, H.; Abanades, S.; Seo, S.: Production of C2-hydrocarbons and Hydrogen from Methane Pyrolysis with Concentrated Solar Energy, AIP Conference Proceedings, Vol. 2303, 2020

Publications

Ota, Y.; Kubushiro, K.; Yamazaki, Y.: Effect of long time stress dwell on cold dwell fatigue behavior of Ti-6Al-4V, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 69, No. 8, 2020, pp. 599-604 (in Japanese)

Publications

Masuda, S.; Shimizu, F.; Fuchiwaki, M.; Tanaka, K.: Modelling and reducing fuel flow pulsation of a fuel-metering system by improving response of the pressure control valve during pump mode switching in a turbofan engine, ASME/BATH 2019 Symposium on Fluid Power and Motion Control, FPMC 2019, 2020

Publications

Yoshitsugu, K.; Kato, D.; Hirogaki, T.; Aoyama, E.; Takahashi, K.: Machine-learning-based approach to improve the positioning accuracy of large industrial robots, International Conference on Control, Automation and Systems

Publications

Deguchi, M.; Yamasaki, S.; Mitsuhara, M.; Nakashima, H.; Ota, Y.: Dislocation motion and microstructure evolution deformed during creep at room temperature in Ti-6Al-4V alloy, Keikinzoku/Journal of Japan Institute of Light Metals, Vol. 70, No. 8, 2020, pp. 405-414 (in Japanese)

Publications

Kanna, S.; Yamashita, Y.; Kawabata, T.: Reproducibility of pop-ins in fracture test of heterogeneous welds and numerical assessment of crack arrest, Journal of Testing and Evaluation, Vol. 48, No. 3, 2020

Publications

Yao, Y.; Kitamura, S.; Ishima, R.; Murakami, T.; Hayashi, T.; Takahashi, T.; Kowashi, Y.; Segawa, Y.: Enhancement of detection functions of a 3d-laser-radar-type obstacle detection system at a level crossing, WIT Transactions on the Built Environment, Vol. 199, 2020, pp. 43-52

Publications

Takehisa, Y.; Mitsuru, O.: Prediction of ductile crack growth resistance using mechanical properties of material, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 38, No. 2, 2020, pp. 85-94 (in Japanese)

Publications

Kuroki, H.; Kondo, Y.; Wakabayashi, T.; Nakamura, K.; Takamatsu, K.; Nezaki, K.; Tsunori, M.: Fatigue characteristic of linear friction welded Ti-6Al-4V joints, Lecture Notes in Mechanical Engineering, 2020, pp. 3-15

Publications

Kanno, N.; Higashi, M.; Takai, R.; Ishikawa, S.; Sasaki, K.; Sugiyama, K.; Sumi, Y.: Development and Application of New Cast and Wrought Ni-Base Superalloy M647 for Turbine Disk, Minerals, Metals and Materials Series, 2020, pp. 82-90

Publications

Lang, H.; Goto, T.; Sato, D.; Kato, D.; Jeschke, P.: Performance analysis of a compressor leading edge without pressure spike at high subsonic speed, International Journal of Gas Turbine, Propulsion and Power Systems, Vol. 11, No. 4, 2020, pp. 56-67

Publications

Sugiyama, K.; Sumi, Y.; Kanno, N.; Higashi, M.; Takai, R.; Ishikawa, S.; Sasaki, K.: Alloy Design and Microstructural Evolution During Heat Treatment of Newly Developed Cast and Wrought Ni-Base Superalloy M647 for Turbine Disk Application, Minerals, Metals and Materials Series, 2020, pp. 91-102

Publications

Fukuhara, T.; Sakamoto, Y.; Kuwahara, T.; Sugimura, N.; Yoshida, K.; Takahashi, Y.: Commercial Uncooled Microbolometer Camera Applied to 50-kg Class Satellite, IEEE Geoscience and Remote Sensing Letters, Vol. 17, No. 2, 2020, pp. 332-336

Publications

Tanaka, Y.; Watanabe, S.; Ohashi, S.; Matsunaga, Y.: Numerical investigation of suction performance of inducer with splitter blade, International Journal of Fluid Machinery and Systems, Vol. 13, No. 4, 2020, pp. 750-758

Publications

Kishimoto, M.; Muroyama, H.; Suzuki, S.; Saito, M.; Koide, T.; Takahashi, Y.; Horiuchi, T.; Yamasaki, H.; Matsumoto, S.; Kubo, H.; Takahashi, N.; Okabe, A.; Ueguchi, S.; Jun, M.; Muramoto, T.; Ohara, H.; Matsuo, T.; Matsui, T.; Iwai, H.; Yoshida, H.; Eguchi, K.: Development of solid oxide fuel cell systems for utilization of ammonia, ICOPE 2019 - 7th International Conference on Power Engineering, Proceedings, 2020, pp. 839-842

Publications

Hasegawa, M.; Ichikawa, K.: Influence of tool path when groove shape machining using ceramic end mill on tool cutting edge, JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP 2020, 2020

Publications

Hu, J.; Kita, N.; Kita, Y.: Clothing category classification using common models adaptively adjusted to observation, VISIGRAPP 2020 - Proceedings of the 15th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications, Vol. 5, 2020, pp. 310-317

Publications

Sasaki, W.; Natsu, W.; Xing, H.: Study on wire electrochemical machining of nickel base alloy using fine wire electrode, JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP 2020, 2020

Publications

Perez, E.; Kelly, R.T.; Matsui, K.; Tani, N.; Jemcov, A.: Analysis of the convergence rate of turbulence model uncertainties for transonic axial compressor simulation, Proceedings of the ASME Turbo Expo, Vol. 2, 2020

Publications

Nomura, K.; Kubushiro, K.: Evaluation of reheat cracking susceptibility in high strength austenitic stainless steels, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 69, No. 1, 2020, pp. 105-110 (in Japanese)

Publications

Nakamura, T.; Ichikawa, K.; Hasegawa, M.; Kaneko, J.; Abe, T.: Optimization method of rotational axis motion in 5-axis controlled machining to keep command tool feed rate, JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP 2020, 2020

Publications

Wakabayashi, Y.; Yasuda, K.; Hirahara, Y.: Construction productivity improvement of concrete bridge by combining BIM and ICT, Proceedings of the fib Symposium 2020: Concrete Structures for Resilient Society, 2020, pp. 1453-1460

Publications

Idani, T.; Sugimura, M.: Structural reinforcement for hangers and main cable of bosphorus bridge, IABSE Symposium, Wroclaw 2020: Synergy of Culture and Civil Engineering - History and Challenges, Report, 2020, pp. 1032-1039

Publications

Koguma, Y.: Regulated Evolution Strategies: A Framework of Evolutionary Algorithms with Stability Analysis Result, IEEJ Transactions on Electrical and Electronic Engineering, Vol. 15, No. 9, 2020, pp. 1337-1349

Publications

Ohtsuka, H.; Sano, N.; Nohara, M.; Morita, Y.; Ito, T.; Yamamoto, T.; Habu, H.: New control schemes and flight results of world’s smallest ss-520 no.5 for micro-satellite, Advances in the Astronautical Sciences, Vol. 171, 2020, pp. 3903-3918

Publications

Ichikawa, K.; Nakamura, T.; Kaneko, J.; Hasegawa, M.; Abe, T.: Development of tool path generation method for complex deep groove shape with simultaneous 4-axis machining, JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP 2020, 2020

Publications

Inose, K.: Subjects and efforts for practical use of laser beam welding applying thick steel plate fabrication, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 89, No. 1, 2020, pp. 38-44 (in Japanese)

Publications

Wakabayashi, Y.; Yasuda, K.; Hirahara, Y.: Construction productivity improvement of concrete bridge by combining BIM and ICT, fib Symposium, 2020, pp. 1453-1460

Publications

Matsunari, S.; Watanabe, K.; Ohno, E.; Echizenya, M.: Sampling method for woody biomass particles conveyed by air in the fuel pipe of pulverized coal firing boiler, ICOPE 2019 - 7th International Conference on Power Engineering, Proceedings, 2020, pp. 245-250

Publications

Ozasa, H.; Asakawa, E.; Murakami, F.; Takekawa, J.; Mikada, H.: Survey performance of deeply-towed marine seismic vibrator with post-survey processing optimized for deeply-towed survey, Offshore Technology Conference Asia 2020, OTCA 2020, 2020

Publications

Yonemoto, K.; Fujikawa, T.; Yamasaki, Y.; Asakawa, H.; Noguchi, Y.; Ishikawa, T.; Morito, T.: Preliminary design status of unmanned suborbital spaceplane with lox/methane engines by tokyo university of science's start-up with the partnership of industries: Part 2, Proceedings of the International Astronautical Congress, IAC

Publications

Tsunori, M.; Mouri, M.; Sasou, S.; Kusumoto, H.: Reduction of Welding Deformation for Fillet Welding of Aluminum Plate, Keikinzoku Yosetsu/Journal of Light Metal Welding, Vol. 58, No. 10, 2020, pp. 401-407 (in Japanese)

Publications

Naruse, H.; Ishii, T.; Oinuma, H.; Kusuda, S.; Ooba, Y.; Hirakawa, K.; Ishikawa, H.: The effect of intake length on aerodynamic characteristics under inlet distortion, Proceedings of 2020 International Congress on Noise Control Engineering, INTER-NOISE 2020, 2020

Publications

Hirako, K.; Toshifumi, Y.; Kamiya, K.; Kurosaki, H.; Fukami, T.; Aoyama, T.; Izumiyama, T.: Optical observation of near earth object by a micro satellite from low earth orbit, Proceedings of the International Astronautical Congress, IAC

Publications

Nishimura, M.; Komaki, A.; Kiga, T.; Choi, W.: Experimental investigations on spontaneous combustion of pulverized coal in the oxyfuel combustion system, ICOPE 2019 - 7th International Conference on Power Engineering, Proceedings, 2020, pp. 603-608

Publications

Yanagisawa, M.; Uehara, H.; Sato, K.; Kishi, K.; Asaoka, H.; Kinoshita, M.; Namura, E.; Arita, M.: Development of internationally competitive solid rocket booster for H3 launch vehicle, Proceedings of the International Astronautical Congress, IAC

Publications

Shinozaki, I.; Sakakibara, Y.; Nakayama, G.: The accelerated atmospheric corrosion testing of al casting alloy and its monitoring method, Keikinzoku Yosetsu/Journal of Light Metal Welding, Vol. 58, 2020, pp. 145-149

Publications

Kobyłecki, R.; Matsuo, T.; Imaizumi, Y.; Maruyama, M.; Omata, K.; Horio, M.: Erratum to: Managing of agglomerate formation in a utility scale pressurized fluidized bed combustor (Chemical and Process Engineering - Inzynieria Chemiczna i Procesowa (2010) 31 (767-788)), Chemical and Process Engineering - Inzynieria Chemiczna i Procesowa, Vol. 41, No. 2, 2020

Publications

Hamaguchi, K.; Sakata, Y.; Fujisawa, N.; Ohta, Y.; Kato, D.: Effect of forward-swept rotor on stall margin in an axial flow compressor at distorted inflow condition, International Journal of Gas Turbine, Propulsion and Power Systems, Vol. 11, No. 4, 2020, pp. 13-21

Publications

Nakayama, G.: Examples and preventive measures of stress corrosion cracking, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 89, No. 5, 2020, pp. 349-350 (in Japanese)

Publications

Ozasa, H.; Asakawa, E.; Murakami, F.; Takekawa, J.; Mikada, H.: Simple theory for processing reflection seismic data from moving offshore vibratory source, SEG Technical Program Expanded Abstracts

Publications

Takanashi, M.: Fatigue life prediction of notched specimen based on stress gradient, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 3, 2020

Publications

Shimizu, Y.; Kobayashi, A.; Watanabe, K.; Ohno, E.; Echizenya, M.; Fujita, K.; Mori, K.; Saito, T.: Study on relations between abnormal vibration and friction characteristics of a roller depending on water content for three types of fined coal, ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), Vol. 7, 2020

Publications

Saruwatari, S.; Kamo, T.; Nakata, Y.; Kadoi, K.; Inoue, H.: Effect of grain boundary migration on intergranular fracture in the weld metal of steels, Welding International, Vol. 34, No. 4-6, 2020, pp. 210-218