Publications

Okafor, E.C.; Yamashita, H.; Hayakawa, A.; Somarathne, K.D.K.A.; Kudo, T.; Tsujimura, T.; Uchida, M.; Ito, S.; Kobayashi, H.: Flame stability and emissions characteristics of liquid ammonia spray co-fired with methane in a single stage swirl combustor, Fuel, Vol. 287, 2021

Publications

Okafor, E.C.; Kurata, O.; Yamashita, H.; Inoue, T.; Tsujimura, T.; Iki, N.; Hayakawa, A.; Ito, S.; Uchida, M.; Kobayashi, H.: Liquid ammonia spray combustion in two-stage micro gas turbine combustors at 0.25 MPa; Relevance of combustion enhancement to flame stability and NOx control, Applications in Energy and Combustion Science, Vol. 7, 2021

Publications

Ho, H.-J.; Iizuka, A.; Shibata, E.; Tomita, H.; Takano, K.; Endo, T.: Utilization of CO₂ in direct aqueous carbonation of concrete fines generated from aggregate recycling: Influences of the solid–liquid ratio and CO₂ concentration, Journal of Cleaner Production, Vol. 312, 2021

Publications

Yonekura, K.; Suzuki, K.: Data-driven design exploration method using conditional variational autoencoder for airfoil design, Structural and Multidisciplinary Optimization, Vol. 64, No. 2, 2021, pp. 613-624

Publications

Tanaka, M.; Tsugane, K.; Suga, D.; Tomura, S.; Ohmura, R.; Yasuda, K.: Simultaneous Crystallization of Cyclopentane Hydrate and Sodium Chloride for Desalination and Salt Manufacture, ACS Sustainable Chemistry and Engineering, Vol. 9, No. 27, 2021, pp. 9078-9084

Publications

Uemoto, M.; Kurata, S.; Kawaguchi, N.; Yabana, K.: First-principles study of ultrafast and nonlinear optical properties of graphite thin films, Physical Review B, Vol. 103, No. 8, 2021

Publications

Higashi, M.; Ozaki, T.: Selective laser melting of MoSiBTiC alloy with plasma-spheroidized powder: Microstructure and mechanical property, Materials Characterization, Vol. 172, 2021

Publications

Kubo, S.; Koguchi, A.; Yaji, K.; Yamada, T.; Izui, K.; Nishiwaki, S.: Level set-based topology optimization for two dimensional turbulent flow using an immersed boundary method, Journal of Computational Physics, Vol. 446, 2021

Publications

Chen, Z.; Okamoto, N.L.; Chikugo, K.; Inui, H.: On the possibility of simultaneously achieving sufficient oxidation resistance and creep property at high temperatures exceeding 1000 °C in Co-based superalloys, Journal of Alloys and Compounds, Vol. 858, 2021

Publications

Wada, S.; Kushida, T.; Itagaki, H.; Shibue, T.; Kadowaki, H.; Arakawa, J.; Furukawa, Y.: 13C NMR study on carbamate hydrolysis reactions in aqueous amine/CO₂ solutions, International Journal of Greenhouse Gas Control, Vol. 104, 2021

Publications

Higashi, M.; Yoshimi, K.: Electron beam surface melting of MoSiBTiC alloys: Effect of preheating on cracking behavior and microstructure evolution, Materials and Design, Vol. 209, 2021

Publications

Mizukami, K.; Hioki, S.; Moriyama, K.; Ogi, K.; Miyaji, W.; Kimura, K.: Eddy-current array-probe technique for imaging near-surface and deep-lying delaminations in multidirectional carbon fiber composites, Composite Structures, Vol. 276, 2021

Publications

Kato, D.; Yoshitsugu, K.; Hirogaki, T.; Aoyama, E.; Takahashi, K.: Predicting positioning error and finding features for large industrial robots based on deep learning, International Journal of Automation Technology, Vol. 15, No. 2, 2021, pp. 206-214

Publications

Li, Q.; Wang, Q.; Tsuboi, Y.; Zhang, J.; Liu, J.: Steam reforming of tar studied in bench-scale experiments and pilot-scale tests with simulations, Fuel, Vol. 290, 2021

Publications

Senshu, H.; Mizuno, T.; Umetani, K.; Nakura, T.; Konishi, A.; Ogawa, A.; Ikeda, H.; Matsumoto, K.; Noda, H.; Ishihara, Y.; Sasaki, S.; Tateno, N.; Ikuse, Y.; Mayuzumi, K.; Kase, T.; Kashine, H.: Light detection and ranging (LIDAR) laser altimeter for the Martian Moons Exploration (MMX) spacecraft, Earth, Planets and Space, Vol. 73, No. 1, 2021

Publications

Hara, S.; Iwami, Y.; Kawasaki, R.; Matsumoto, T.; Shirai, Y.; Shiotsu, M.; Kobayashi, H.; Naruo, Y.; Nonaka, S.; Inatani, Y.; Ishii, M.; Yoshinaga, S.; Tanaka, T.: Development of Liquid Hydrogen Cooling System for a Rotor of Superconducting Generator, IEEE Transactions on Applied Superconductivity, Vol. 31, No. 5, 2021

Publications

Higashi, M.; Ozaki, T.: Powder property, microstructure, and creep behavior of a P/M Mo-Si-B based alloy, Materials and Design, Vol. 198, 2021

Publications

Shima, K.; Otaka, Y.; Sato, N.; Funato, Y.; Fukushima, Y.; Momose, T.; Shimogaki, Y.: Conformal and Stoichiometric Chemical Vapor Deposition of Silicon Carbide onto Ultradeep Heterogeneous Micropores by Controlling the Initial Nucleation Stage, ACS Applied Materials and Interfaces, Vol. 13, No. 44, 2021, pp. 53009-53020

Publications

Somekawa, T.; Izawa, J.; Fujita, M.; Kawanaka, J.; Kuze, H.: Remote detection of oils in water using laser Raman spectroscopy, Optics Communications, Vol. 480, 2021

Publications

Izuno, H.; Demura, M.; Yamazaki, M.; Tabuchi, M.; Abe, D.; Torigata, K.: Damage model determination for predicting creep rupture time of 2 1/4Cr-1Mo steel weld joints, Materials Transactions, Vol. 62, No. 7, 2021, pp. 1013-1022

Publications

Higashi, M.; Kanno, N.: Evaluation of Hot Workability of Powder Metallurgy Ni-Based Superalloy with Different Initial Microstructures, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 52, No. 1, 2021, pp. 181-193

Publications

Matsuno, T.; Ochiai, Y.; Okitsu, Y.; Iga, M.; Kohri, A.; Mikami, T.: Surface and interior residual stress analysis of a deep-drawn 1180-MPa class ultra-high strength steel sheet with scratch marks, International Journal of Advanced Manufacturing Technology, Vol. 116, No. 9-10, 2021, pp. 2873-2884

Publications

Wakabayashi, Y.; Yasuda, K.; Tsujii, H.; Konno, K.; Hirahara, Y.: Labor productivity improvement of concrete bridge through utilizing bim and ict, fib Symposium

Publications

Kinefuchi, K.; Cho, S.; Fukatsu, T.; Tsukizaki, R.; Funaki, I.; Hirano, Y.; Tashiro, Y.; Shiiki, T.: Keeper ignition and discharge characteristics of hollow cathode center-mounted on hall Thruster, Journal of Propulsion and Power, Vol. 37, No. 2, 2021, pp. 223-230

Publications

Sato, N.; Funato, Y.; Shima, K.; Sugiura, H.; Fukushima, Y.; Momose, T.; Koshi, M.; Shimogaki, Y.: Elementary gas-phase reactions of radical species during chemical vapor deposition of silicon carbide using CH3SiCl3, International Journal of Chemical Kinetics, Vol. 53, No. 5, 2021, pp. 638-645

Publications

Shinozaki, I.; Sakakibara, Y.; Nakayama, G.; Tada, E.; Ooi, A.; Nishikata, A.: Effects of Fe3+ on the corrosion behavior of high-purity aluminum in neutral solutions containing Cl1, Materials Transactions, Vol. 62, No. 4, 2021, pp. 492-497

Publications

Somekawa, T.; Izawa, J.; Fujita, M.; Kawanaka, J.; Kuze, H.: Raman lidar for remote sensing of oil in water, Applied Optics, Vol. 60, No. 25, 2021, pp. 7772-7774

Publications

Kato, D.; Yoshitsugu, K.; Maeda, N.; Hirogaki, T.; Aoyama, E.; Takahashi, K.: Positioning error calibration of industrial robots based on random forest, International Journal of Automation Technology, Vol. 15, No. 5, 2021, pp. 581-589

Publications

Yamamoto, K.; Fukuda, M.; Hanatani, A.: Ultrasupercritical and advanced ultrasupercritical power plants, Advances in Power Boilers, 2021, pp. 345-390

Publications

Matsuoka, K.; Kuramoto, K.; Hosokai, S.; Sato, H.; Tsuboi, Y.: Reducing Tar Emissions during Coal Gasification by Optimizing the Cracking/Reforming over Char in a Fluidized Bed, Energy and Fuels, Vol. 35, No. 7, 2021, pp. 5955-5962

Publications

Pan, L.; Yang, M.; Murae, S.; Sato, W.; Kawakubo, T.; Yamagata, A.; Deng, K.: Study on aerodynamic excitation of radial turbine blades with vaneless volute at low excitation order, Journal of Fluids and Structures, Vol. 107, 2021

Publications

Sato, K.; Yoshimura, Y.; Hanada, T.; Izumiyama, T.; Shinohara, R.: The collision avoidance strategy for geostationary satellites considering orbit maintenance, Journal of Space Safety Engineering, Vol. 8, No. 4, 2021, pp. 331-338

Publications

Hatsugai, T.; Kiyokawa, H.; Takeya, S.; Ohmura, R.: Improved Operation of Continuous Ozone Hydrate Production, Chemical Engineering and Technology, Vol. 44, No. 9, 2021, pp. 1677-1685

Publications

Kanazawa, S.; Yamazaki, N.; Asakura, Y.; Kubushiro, K.; Ogasawara, T.: High-temperature fatigue crack propagation mechanism of orthogonal 3-D woven amorphous SiC Fiber/SiC/YSi2-Si matrix composites, Journal of the American Ceramic Society, Vol. 104, No. 11, 2021, pp. 5923-5933

Publications

Ito, G.; Kawashima, R.; Komurasaki, K.; Koizumi, H.: Incident angle dependence of reflected particles in low-energy xenon-ion impacts on metal surfaces, Computational Materials Science, Vol. 186, 2021

Publications

Shioda, Y.; Saito, N.; Tanoue, T.; Nomura, K.; Kubushiro, K.: Creep damage assessment of Gr.91 steel welds by UPA method, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 70, No. 2, 2021, pp. 177-183 (in Japanese)

Publications

Hosokawa, A.; Yoneyama, N.; Nakanowatari, I.; Eguchi, H.; Takagi, K.: Production of anisotropic Sm-Fe-N magnet sheets by modified powder rolling, Materials Letters, Vol. 294, 2021

Publications

Akikubo, K.; Tachibana, M.: Preparation of anatase TiO2nanowalls using carbon nanowall templating for photoelectrochemical water splitting, Japanese Journal of Applied Physics, Vol. 60, No. 1, 2021

Publications

Tamaki, H.; Ouchida, S.; Unno, M.: Experimental fluid dynamics applications in radial turbomachines: Inlet recirculation in centrifugal compressor, rotating stall and flow in vaneless diffuser, and improvement in accuracy of CFD for predicting flow fields in a radial turbine rotor, Journal of Physics: Conference Series, Vol. 1909, No. 1, 2021

Publications

Ota, Y.; Kubushiro, K.; Yamazaki, Y.: The effects of test stress and microstructure for cold dwell fatigue properties of Ti-6Al-4V and its life assessment, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 70, No. 4, 2021, pp. 323-329 (in Japanese)

Publications

Hirohata, M.; Sakai, N.; Morioka, K.; Matsumoto, N.; Hyoma, K.; Inose, K.: Application of Laser-Arc Hybrid Welding to Thick Steel Plates for Bridge Structures, Lecture Notes in Mechanical Engineering, Vol. 22, 2021, pp. 489-496

Publications

Hanatani, A.; Ozawa, M.: General planning of thermal power plant, Advances in Power Boilers, 2021, pp. 107-118

Publications

Hara, H.; Chida, J.; Pasiana, A.D.; Uchiyama, K.; Kikuchi, Y.; Naito, T.; Takahashi, Y.; Yamamura, J.; Kuromatsu, H.; Sakaguchi, S.: Vaporized hydrogen peroxide and ozone gas synergistically reduce prion infectivity on stainless steel wire, International Journal of Molecular Sciences, Vol. 22, No. 6, 2021

Publications

OTA, Y.; KUBUSHIRO, K.; YAMAZAKI, Y.: The life assessment by linear cumulative damage rule for cold dwell fatigue of Ti-6Al-4V, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 70, No. 1, 2021, pp. 35-40 (in Japanese)

Publications

Yonekura, K.; Shinohara, T.; Masaki, K.: Cost-effective estimation of flash extrusion and defects in linear friction welding using Voronoi diagrams, Journal of Manufacturing Processes, Vol. 68, 2021, pp. 158-167

Publications

Dodo, Y.; Nagaya, S.; Okada, T.; Toyoda, M.; Ito, A.: Development and Design of a Floating Type Ocean Current Turbine System, Lecture Notes in Civil Engineering, Vol. 65, 2021, pp. 732-755

Publications

Li, Y.; Katsumata, G.; Masaki, K.; Hayashi, S.; Itabashi, Y.; Nagai, M.; Suzuki, M.; Kanto, Y.: Verification of probabilistic fracture mechanics analysis code for reactor pressure vessel, Journal of Pressure Vessel Technology, Transactions of the ASME, Vol. 143, No. 4, 2021

Publications

Nomura, Y.; Yamamura, J.; Fukui, C.; Fujimaki, H.; Sakamoto, K.; Matsuo, K.-I.; Kuromatsu, H.; Kikuchi, Y.; Haishima, Y.: Performance evaluation of bactericidal effect and endotoxin inactivation by low-temperature ozone/hydrogen peroxide mixed gas exposure, Journal of Biomedical Materials Research - Part B Applied Biomaterials, Vol. 109, No. 11, 2021, pp. 1807-1816

Publications

Tomita, H.; Takano, K.; Endo, T.; Yamanaka, Y.; Nariai, K.; Kamata, H.; Poh, C.K.; Chen, L.; Borgna, A.: Development of Catalytic Methanation as a Solution of CO₂ Utilization, 15th Greenhouse Gas Control Technologies Conference 2021, GHGT 2021, 2021

Publications

Hirota, T.; Nagoshi, Y.; Hojo, K.; Okada, H.; Takahashi, A.; Katsuyama, J.; Ueda, T.; Ogawa, T.; Yashirodai, K.; Ohata, M.; Minami, F.: Benchmark analysis by beremin model and GTN model in CAF subcommittee, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 1, 2021

Publications

Mahfuz, H.; Asseff, N.; Akram, M.W.; Zhou, F.; Suzuki, T.; Canino, M.: Advances in ocean current turbine blade design, AIP Conference Proceedings, Vol. 2324, 2021

Publications

Kato, D.; Yoshitugu, K.; Maeda, N.; Hirogaki, T.; Aoyama, E.; Takahashi, K.: Finding features of positioning error for large industrial robots based on convolutional neural network, Proceedings of the ASME Design Engineering Technical Conference, Vol. 2, 2021

Publications

Tanaka, Y.; Kitabata, T.; Nasu, K.; Watanabe, S.; Ohashi, S.; Sakata, A.: Effect of suction pipeline resistance on cavitation surge in a turbopump with inducer, Journal of Physics: Conference Series, Vol. 1909, No. 1, 2021

Publications

Handa, T.; Murakami, Y.; Igi, S.; Toyoda, M.; Kiji, N.; Inose, K.: Brittle Crack Arrest Technique for Large Container Ships Using Fillet Welding, JFE Technical Report, No. 26, 2021, pp. 103-110

Publications

Zhang, H.; Zhang, Y.; Yang, W.; Hu, L.; Zhang, Y.; Ishikawa, A.; Liu, Z.: Concept and Validation of Electric Energy Storage by a Fluidized Bed, Energy Proceedings, Vol. 16, 2021

Publications

Suzuki, T.; Iosifidis, G.; Starzmann, J.; Sato, W.; Filsinger, D.; Bamba, T.: 1D gas exchange modelling of double scroll turbines: Experimental validation and improved modelling, 14th International Conference on Turbochargers and Turbocharging - Proceedings of the International Conference on Turbochargers and Turbocharging, 2021, pp. 62-80

Publications

Tanaka, Y.; Kitabata, T.; Watanabe, S.; Ohashi, S.; Sakata, A.; Matsunaga, Y.: Evaluation of suction performance of inducer with splitter blade, International Journal of Fluid Machinery and Systems, Vol. 14, No. 1, 2021, pp. 13-24

Publications

Kida, Y.; Hara, R.; Kita, H.; Koguma, Y.; Inamura, A.; Hamaguchi, K.: Two stage operation scheme for a microgrid including hydrogen production as a part of demand, Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi), Vol. 214, No. 2, 2021

Publications

Kanazawa, S.; Yamazaki, N.; Asakura, Y.; Kubushiro, K.; Ishikawa, T.; Ogasawara, T.: Development of orthogonal 3-d woven amorphous sic fiber / SiC/YSi2-Si matrix composites, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 70, No. 2, 2021, pp. 86-92 (in Japanese)

Publications

Uchida, M.; Ito, S.; Suda, T.: Demonstration of direct spray combustion of liquid ammonia by 2MW-class gas turbine, Proceedings of the International Conference on Power Engineering 2021, ICOPE 2021, 2021

Publications

Ishikawa, H.; Yamauchi, Y.; Mizouchi, K.: Vehicle detection at intersections by LIDAR system, Smart Sensing for Traffic Monitoring, 2021, pp. 81-96

Publications

Inoue, C.; Yoshida, H.; Kouwa, J.; Iwaki, Y.; Itoh, M.: Measurement and modeling of planar airblast spray flux distributions, International Journal of Multiphase Flow, Vol. 137, 2021

Publications

Watanabe, Y.; Ikeya, N.; Filsinger, D.; Okamoto, S.: Heat transfer modelling in vehicular turbochargers for engine simulation, 14th International Conference on Turbochargers and Turbocharging - Proceedings of the International Conference on Turbochargers and Turbocharging, 2021, pp. 326-340

Publications

Hanaoka, R.; Nagatani, G.; Ishii, H.: Development of ammonia co-firing burner with coal for coal firing boiler, Proceedings of the International Conference on Power Engineering 2021, ICOPE 2021, 2021

Publications

Okita, Y.; Futamura, H.; Yamane, T.; Suzuki, M.; Tanaka, N.; Tanimitsu, H.; Iguchi, J.: DESIGN and DEVELOPMENT of A NEW ROTATING TURBINE RESEARCH FACILITY for INVESTIGATING the INTERACTION between MAINSTREAM and VARIOUS SECONDARY AIR at RELEVANT ENGINE CONDITIONS, Proceedings of the ASME Turbo Expo, Vol. 5, 2021

Publications

Kato, D.; Maeda, N.; Hirogaki, T.; Aoyama, E.; Takahashi, K.: Position Calibration Method for Large size Industrial Robots Based on Random Forest, International Conference on Control, Automation and Systems

Publications

Furuya, O.; Fujita, S.; Muta, H.; Ohtori, Y.; Itoi, T.; Okamura, S.; Minagawa, K.; Nakamura, I.; Fujimoto, S.; Otani, A.; Nishida, A.; Watakabe, T.: Research and examination of seismic safety evaluation and function maintenance for important equipment in nuclear facilities, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 5, 2021

Publications

Isogai, H.; Endo, T.; Takano, K.; Nakagaki, T.: Holistic Approach to Understanding and Managing Amine Degradation during Post-combustion CO₂ Capture Operation, 15th Greenhouse Gas Control Technologies Conference 2021, GHGT 2021, 2021

Publications

Makino, K.; Sawaguchi, M.; Ohno, T.: Proposal for a "definition of function" method for product improvement design, Journal of Japan Industrial Management Association, Vol. 72, No. 1, 2021, pp. 46-54 (in Japanese)

Publications

Yamashita, R.; Hiroi, Y.; Arazoe, M.; Yamamoto, T.; Miyagawa, T.: Creep behavior of carbon fiber reinforced plastic sheet anchor embedded in concrete with epoxy resin, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 70, No. 4, 2021, pp. 293-299

Publications

Ozasa, H.; Takekawa, J.; Mikada, H.: REMOVAL OF FREQUENCY NOTCHES IN MARINE SEISMIC DATA ACQUIRED BY A DEEPLY TOWED SOURCE, 82nd EAGE Conference and Exhibition 2021, Vol. 7, 2021, pp. 5118-5122

Publications

Ota, Y.; Miyazawa, Y.; Hasegawa, M.; Sakakibara, Y.: Cutting Technology of Titanium Aluminide Alloy Blades and Its Effect on Microstructure, 10th International Conference on Leading Edge Manufacturing Technologies in 21st Century, LEM 2021, 2021, pp. 229-233

Publications

Nie, J.; Ono, K.; Okada, S.; Takeshima, N.: Experimental study on buckling strength of stub-column with box section made of SBHS700, Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations - Proceedings of the 10th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2020, 2021, pp. 3852-3857

Publications

Dung, L.D.; Minh, P.A.; Linh, N.H.; Hong, N.N.; Ohno, E.; Ishii, H.; Van De Steene, L.: Char burnout characteristics of various vietnamese woody biomass: Effect of lean and rich oxygen concentration on char conversion, Journal of Mechanical Engineering Research and Developments, Vol. 44, No. 2, 2021, pp. 260-267

Publications

Murakami, T.; Yamashita, Y.; Nakatani, M.; Akizuki, Y.: Fatigue crack growth arrester using gourd-shaped-insert-plate for steel bridge deck, Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations - Proceedings of the 10th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2020, 2021, pp. 2711-2716

Publications

Nakai, H.; Takanashi, M.; Kojima, H.; Ito, K.: An approach to thermo-mechanical fatigue life prediction for turbine housings in gasoline engine application, 14th International Conference on Turbochargers and Turbocharging - Proceedings of the International Conference on Turbochargers and Turbocharging, 2021, pp. 252-262

Publications

Filsinger, D.; Kuwata, G.; Ikeya, N.: Tailored Centrifugal Turbomachinery for Electric Fuel Cell Turbocharger, International Journal of Rotating Machinery, Vol. 2021

Publications

Karasawa, H.; Shibasaki, H.; Itohiya, G.; Yamashita, S.; Arai, K.: Sand Erosion of Polyurethane Coating Materials for CFRP at Elevated Temperature, Clinical Neurology, Vol. 70, No. 12, 2021, pp. 896-903 (in Japanese)

Publications

Sobajima, K.; Nie, J.; Miyashita, T.; Okada, S.; Takeshima, N.; Ono, K.: An experimental study on local buckling strength of welded box section stub-columns made of SBHS400, Lecture Notes in Civil Engineering, Vol. 101, 2021, pp. 1403-1413

Publications

Matsui, K.; Perez, E.; Kelly, R.T.; Tani, N.; Jemcov, A.: Calibration of spalart-allmaras model for simulation of corner flow separation in linear compressor cascade, Journal of the Global Power and Propulsion Society

Publications

Kajii, S.; Takemoto, M.; Jikumaru, T.; Suzuki, F.; Ogasawara, S.; Orikawa, K.: Reduction in Eddy Current Loss of Concentrated Windings in High-power Density IPMSM Using Rectangular Windings, Proceedings of the IEEE International Conference on Industrial Technology

Publications

Prayitno, Y.A.K.; Zhao, T.; Iso, Y.; Takei, M.: A simulation and experimental study on particle volume fraction of PMMA suspension in centrifugal fields, AIP Conference Proceedings, Vol. 2403, 2021

Publications

Matsunari, S.; Yamada, T.; Ohno, E.: The air velocity of starting deposition of biomass particle conveyed by air in the fuel pipes of boilers, Proceedings of the International Conference on Power Engineering 2021, ICOPE 2021, 2021

Publications

Tsutsumi, S.; Morita, K.; Mouri, M.: Paper Review of“Numerical investigation on fatigue crack initiation and propagation lives for non-load carrying fillet welded joint considering cyclic elastoplasticity response of steel”, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 90, No. 5, 2021 (in Japanese)

Publications

Kato, T.; Morito, T.; Terada, K.; Kurata, S.; Minoshima, K.: Ultrafast phenomena induced in crystal by one-shot three-dimensional imaging with optical frequency comb, 2021 Conference on Lasers and Electro-Optics, CLEO 2021 - Proceedings, 2021

Publications

Yamazaki, Y.; Yamagishi, S.; Shimada, T.; Tokuda, K.: Fatigue life evaluation of sus316 steel under thermomechanical fatigue loading with tension hold, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 70, No. 2, 2021, pp. 105-110 (in Japanese)

Publications

Gao, G.; Gao, S.; He, J.; Ouchi, K.: Ship detection, Maritime Surveillance with Synthetic Aperture Radar, 2021, pp. 119-146

Publications

Yamasaki, S.; Deguchi, M.; Mitsuhara, M.; Nakashima, H.; Ota, Y.; Kubushiro, K.: Evaluation of depth of dislocation visibility in SEM electron channeling contrast imaging in Ti-6Al-4V alloy using serial sectioning method, Microscopy, Vol. 70, No. 3, 2021, pp. 265-277

Publications

Igarashi, S.; Matsuura, Y.: Safe 0.5N Green Monopropellant Thruster for Propulsion Systems of Small Satellites, AIAA Propulsion and Energy Forum, 2021, 2021

Publications

Kimura, K.; Prayitno, Y.A.K.; SEJATl, P.A.; Zhao, T.; Iso, Y.; Takei, M.: Development of liquid-particle image reconstruction method in centrifugal field by linear sensor wireless electrical resistance tomography (LS-WERT), International Conference on Nuclear Engineering, Proceedings, ICONE, Vol. 4, 2021

Publications

Kida, Y.; Hara, R.; Kita, H.; Koguma, Y.; Inamura, A.; Hamaguchi, K.: Two stage operation scheme for a microgrid including hydrogen production as a part of demand, IEEJ Transactions on Power and Energy, Vol. 141, No. 2, 2021, pp. 113-120 (in Japanese)

Publications

Kato, T.; Morito, T.; Terada, K.; Kurata, S.; Minoshima, K.: Ultrafast phenomena induced in crystal by one-shot three-dimensional imaging with optical frequency comb, Optics InfoBase Conference Papers, 2021