Publications

Kawarasaki, T.; Sakakibara, Y.: Development of ammonia SCC test equipment for low temperature and pressure, Ammonia Plant Safety and Related Facilities

Publications

Maruyama, M.; Tomura, S.; Yasuda, K.; Ohmura, R.: Zero emissions, low-energy water production system using clathrate hydrate: Engineering design and techno-economic assessment, Journal of Cleaner Production, Vol. 383, 2023

Publications

Naito, K.; Seki, Y.; Inoue, R.: Static and Fatigue Tensile Properties of Cross-Ply Carbon-Fiber-Reinforced Epoxy-Matrix-Composite Laminates with Thin Plies, Journal of Composites Science, Vol. 7, No. 4, 2023

Publications

Chen, G.; Hirohata, M.; Sakai, N.; Hyoma, K.; Matsumoto, N.; Inose, K.: Charpy absorbed energy in simulated heat-affected zone of laser-arc hybrid welded joints by high-strength steel for bridge structures, International Journal of Advanced Manufacturing Technology, Vol. 127, No. 5-6, 2023, pp. 2655-2669

Publications

Fujisaku, Y.; Naito, H.; Kimoto, T.; Matsumura, M.; Takeshima, N.; Okada, S.; Ono, K.: A Study on Damage Evaluation Method for Box Section Steel Columns Using Autoencoder, Proceedings of the International Offshore and Polar Engineering Conference, 2023, pp. 3215-3221

Publications

Nakamura, H.; Zhang, J.; Hirose, K.; Shimoyama, K.; Ito, T.; Kanaumi, T.: Generating simplified ammonia reaction model using genetic algorithm and its integration into numerical combustion simulation of 1 MW test facility, Applications in Energy and Combustion Science, Vol. 15, 2023

Publications

Kitaoka, S.; Tanaka, M.; Kawashima, N.; Ito, T.; Yokoe, D.; Kato, T.; Ogawa, T.; Yamazaki, N.; Hosoya, N.; Nakamura, T.: CMAS degradation of ytterbium aluminum garnets, Journal of the American Ceramic Society, Vol. 106, No. 8, 2023, pp. 4863-4876

Publications

Shibabuma, K.; Fukada, T.; Yasumoto, H.; Tokuda, K.; Kim, B.-N.; Nikbin, K.: Representative volume element model for quantitatively predicting the influence of 3D polycrystalline morphology on Coble creep deformation, Materials and Design, Vol. 226, 2023

Publications

Ito, Y.; Watanabe, T.; Seki, N.; Hirakawa, K.; Inoue, T.; Himeno, T.: Effect of Channel Size on Air-Cooling Performance in Interior Permanent Magnet Motor Driving Aviation Fans at High Altitude, Journal of Engineering for Gas Turbines and Power, Vol. 145, No. 4, 2023

Publications

Ito, K.; Kinugasa, T.; Chiba, K.; Okuda, Y.; Takasaki, R.; Hida, S.; Okoshi, T.; Hayashi, R.; Yoshida, K.; Osuka, K.: The robotic approach to the passive interlocking mechanism in the hindlimb musculoskeletal system of Crocodylus porosus, Advanced Robotics, Vol. 37, No. 18, 2023, pp. 1187-1197

Publications

Ren, P.; Stuart, C.; Spence, S.; Inomata, R.; Kobayashi, T.; Morita, I.: Using Machine Learning for Loss Prediction in a Hybrid Meanline Modeling Method to Deliver Improved Radial Turbine Performance Prediction, Journal of Turbomachinery, Vol. 145, No. 7, 2023

Publications

Yonekura, K.; Hattori, H.; Shikada, S.; Maruyama, K.: Turbine blade optimization considering smoothness of the Mach number using deep reinforcement learning, Information Sciences, Vol. 642, 2023

Publications

Chen, G.; Sakai, N.; Hirohata, M.; Hyoma, K.; Matsumoto, N.; Inose, K.: Bending Fatigue Characteristics of Butt Joints by Laser-Arc Hybrid Welding for Steel Bridge Members, Lecture Notes in Mechanical Engineering, 2023, pp. 904-916

Publications

Nosseir, A.E.S.; Cervone, A.; Pasini, A.; Igarashi, S.; Matsuura, Y.: ADDITIVELY MANUFACTURED GREEN PROPELLANT TANKS: VOLUME EFFICIENT DESIGNS AND MATERIALS CHEMICAL COMPATIBILITY, International Journal of Energetic Materials and Chemical Propulsion, Vol. 22, No. 6, 2023, pp. 1-16

Publications

Shen, F.; Totsuka, M.; Kuboyama, T.; Moriyoshi, Y.; Yamada, T.; Shimizu, K.; Yoshida, T.: Effects of pre-chamber specifications on lean burn operation in a pre-chamber engine with fuel reformed gas, SAE Technical Paper 2023-32-0007

Publications

Matsuura, Y.; Nitta, K.; Ikeda, H.; Kinoshita, M.; Ui, K.; Tokudome, S.; Hori, K.: Experimental Investigation of Solid Rocket Motor Slag, AIAA SciTech Forum and Exposition, 2023, 2023

Publications

Shima, K.; Otaka, Y.; Sato, N.; Funato, Y.; Fukushima, Y.; Momose, T.; Shimogaki, Y.: Kinetic study on heterogeneous nucleation and incubation period during chemical vapor deposition, Journal of Chemical Physics, Vol. 158, No. 12, 2023

Publications

Hamada, R.; Sakuragi, T.; Asano, H.; Oniki, T.; Uchiyama, M.: Potential methods to reduce the thermal impact of vitrified waste from spent mixed oxide fuel on geological repositories, MRS Advances, Vol. 8, No. 6, 2023, pp. 274-277

Publications

Yu, Y.; Kubota, Y.; Kurita, H.; Narita, F.: Piezoelectric Glass-Fiber-Reinforced Polymer Sensor for Structural Health Monitoring and Stiffness Sensing, Advanced Engineering Materials, 2023

Publications

Otobe, T.; Iwakami, A.; Filsinger, D.: Blade vibration visualization of dual volute turbine with vaned nozzle by using high speed Digital Image Correlation, 15th International Conference on Turbochargers and Turbocharging: Proceedings of the 15th International Conference on Turbochargers and Turbocharging (Twickenham, London, 16-17 May 2023), 2023, pp. 251-261

Publications

Hirose, Y.; Phaal, R.; Farrukh, C.; Gerdsri, N.; Lee, S.; Yamaoka, H.: Kick-Starting Roadmapping Implementation in Corporate Settings: Lessons Learned From IHI Corporation, International Journal of Innovation and Technology Management, Vol. 20, No. 1, 2023

Publications

Tamaki, H.; Yamaguchi, S.: A METHOD FOR PRELIMINARY DESIGN OF VARIABLE GEOMETRY VANED DIFFUSER FOR CENTRIFUGAL COMPRESSOR, Proceedings of the ASME Turbo Expo, Vol. 13, 2023

Publications

Sato, K.; Nomura, K.; Sakakibara, Y.; Shioda, Y.; Saito, N.: Microstructural Changes in 9Cr-1Mo-V-Nb Weld Metal after Aging at 1013 K, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 109, No. 3, 2023, pp. 179-188 (in Japanese)

Publications

Yonekura, K.; Hattori, H.; Nishizu, T.: Fluid topology optimization and additive manufacturing of a liquid atomizer using an extensive number of grid points: Minimizing pressure loss of liquid atomizer, International Journal of Advanced Manufacturing Technology, Vol. 126, No. 3-4, 2023, pp. 1799-1806

Publications

Mueller, J.; Chiba, K.; Oba, Y.: Influence of the Engine Exhaust on the Wing Pressure Distribution, Computed with an Integrated Simulation of Airframe and Running Engine, AIAA Aviation and Aeronautics Forum and Exposition, AIAA AVIATION Forum 2023, 2023

Publications

Mori, A.; Otake, S.; Nakata, R.; Shiina, E.; Yamada, K.; Nakaya, T.: FEASIBILITY STUDY OF ULTRASONIC TESTING FROM OUTSIDE OF RPV TO NICKEL BASED ALLOY MATERIAL WELDS, International Conference on Nuclear Engineering, Proceedings, ICONE

Publications

Asai, T.; Kaneda, Y.; Shimizu, Y.; Soda, T.; Uchikawa, T.; Sugawara, H.; Kobayashi, T.; Kawabata, Y.: Experimental Verification of Short-Circuit Detection and Thyristor-Based Circuit Shut-Off in Permanent Magnet Synchronous Generators, 2023 25th European Conference on Power Electronics and Applications, EPE 2023 ECCE Europe, 2023

Publications

Ota, Y.: Materials I have seen (Self-Introduction), Zairyo/Journal of the Society of Materials Science, Japan, Vol. 72, No. 8, 2023 (in Japanese)

Publications

Idani, T.; Shima, T.: Braila bridge: Design and construction of the cable system, IABSE Symposium Istanbul 2023: Long Span Bridges - Proceeding Book, 2023, pp. 995-1002

Publications

Kimura, H.; Seo, S.; Abanades, S.: Production of Hydrogen and Carbons by Catalytic Decomposition of C2-Hydrocarbons and Methane With Concentrated Solar Energy, AIP Conference Proceedings, Vol. 2815, No. 1, 2023

Publications

Inatomi, T.; Yamamoto, N.; Nakashima, H.; Mori, Y.; Ise, T.; Murata, S.; Yagi, K.; Morita, T.: Investigation of Energy-Scaling of Thrust Performance for Laser Fusion Rocket, Plasma and Fusion Research, Vol. 18, 2023

Publications

Ota, Y.; Nakahara, Y.; Sakakibara, Y.: Evaluation of Tensile Properties of Thermoplastic and Thermosetting Resins Using Small Samples with Small Punch Test, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 72, No. 8, 2023, pp. 599-605 (in Japanese)

Publications

Mori, T.; Shimada, T.; Kai, S.; Otani, A.; Yamamoto, T.; Yan, X.L.: EXPERIMENT OF FLOATING SEISMIC ISOLATION SYSTEM FOR SMR, International Conference on Nuclear Engineering, Proceedings, ICONE

Publications

Kawada, E.; Sato, Y.; Kai, S.; Houghton, Z.; Boyadjian, P.; Koike, D.; Morimoto, Y.: NUSCALE VOYGRTM SMR POWER PLANT TECHNICAL AND SAFETY FEATURES AND ENGINEERING COLLABORATION WITH NUSCALE THROUGH NEXIP INITIATIVE, International Conference on Nuclear Engineering, Proceedings, ICONE

Publications

Shioda, Y.; Saito, N.; Nomura, K.; Kubushiro, K.: Creep Rupture Strength and Phase Stability of the Austenite Phase for KA-SUS304J1HTB, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 109, No. 3, 2023, pp. 215-223 (in Japanese)

Publications

Murano, F.; Nakayama, M.; Seki, S.; Uchida, Y.: Innovative unloading and lifting system applied for deck erection of new suspension bridge across the Danube river in Romania, IABSE Symposium Istanbul 2023: Long Span Bridges - Proceeding Book, 2023, pp. 560-567

Publications

Ishii, Y.; Ohtani, T.; Ishihara, K.; Sakakibara, T.; Kamaya, M.; Ohta, Y.; Kubusiro, K.: Nickel-Based Superalloy Inconel 718, Relation between Non-Linear Ultrasonic and Microstructure Changes under the Creep Damages., Zairyo/Journal of the Society of Materials Science, Japan, Vol. 72, No. 2, 2023, pp. 90-97 (in Japanese)

Publications

Yamazaki, R.; Ono, K.; Takeshima, N.; Okada, S.; Kitane, Y.; Matsumura, M.: An analytical study on local buckling strength of box stub-columns made of SBHS500 under axial compression, Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability - Proceedings of the 11th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2022, 2023, pp. 2171-2176

Publications

Okada, R.; Murooka, T.; Kato, D.: DISTORTION TRANSFER IN MULTI-STAGE COMPRESSOR AND MODELING OF SPOOL-COUPLING PROBLEM WITH CIRCUMFERENTIALLY DISTORTED INFLOW, Proceedings of the ASME Turbo Expo, Vol. 13A, 2023

Publications

Shibukuwa, K.: Seismic Design Method of Crossover Piping Across Building Isolation Boundary, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 7, 2023

Publications

Azuma, K.; Fujiwara, K.; Kai, S.; Otani, A.; Furuya, O.: UNCERTAIN FACTORS IN ELASTIC–PLASTIC FINITE ELEMENT ANALYSIS FOR ELBOWS AND TEES, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 7, 2023

Publications

Hamano, T.; Shiina, E.; Yagi, T.; Hirano, T.: DEVELOPMENT AND DEPLOYMENT OF ABSOLUTE RECORDABLE MANUAL ULTRASONIC TESTING SYSTEM (ARMUT SYSTEM), International Conference on Nuclear Engineering, Proceedings, ICONE

Publications

Okita, Y.; Kazawa, J.; Yamane, T.; Tanaka, N.; Fuchigami, K.; Sato, H.; Hamabe, M.; Tanimitsu, H.: AERODYNAMIC IMPACT OF SECONDARY AIR INJECTION FLOWRATES ON THE MAIN ANNULUS FLOW FIELD AND PERFORMANCE FOR A TRANSONIC HIGH-PRESSURE TURBINE STAGE, Proceedings of the ASME Turbo Expo, Vol. 13B, 2023

Publications

Saitoh, H.; Tsunoda, H.: Numerical Analysis on the Effect of Fuel Injection Timing on Auto-Ignition of an Ethanol Spray in a Rapid Compression and Expansion Machine, Journal of Research and Applications in Mechanical Engineering, Vol. 11, No. 1, 2023

Publications

Nam, T.H.; Goto, K.; Tobata, Y.; Kubota, Y.; Ueda, M.; Kobayashi, S.: Time-and temperature-dependent compressive behavior of woven carbon fabric reinforced polyamide composite laminate, Journal of Composite Materials, Vol. 57, No. 5, 2023, pp. 929-940

Publications

Mori, T.; Shimada, T.; Kai, S.; Otani, A.; Yamamoto, T.; Yan, X.L.: EXPERIMENT OF FLOATING SEISMIC ISOLATION SYSTEM, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 7, 2023

Publications

Yamamoto, Y.; Shibuya, Y.; Oyori, H.; Muraoka, M.: Control Design under Limitation of Motor Current for Electric Fuel Metering System with Redundancy on Aircraft Electrification, SAE Technical Paper 2023-01-0987

Publications

Kawabata, T.; Gotoh, K.; Yamashita, Y.: Accuracy and Some Problems in Welding Residual Stress Evaluation in WES2805, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 92, No. 3, 2023, pp. 166-172 (in Japanese)

Publications

Saito, Y.; Torres, A.T.P.; Ikeda, H.; Nagata, T.; Matsuura, Y.; Igarashi, S.; Chiba, H.; Kida, K.; Kuwahara, T.: Development of Hybrid Thruster Ignition System with Low-Toxicity Fuel and Catalytic Reaction, Proceedings of the International Astronautical Congress, IAC

Publications

Serizawa, H.; Inose, K.; Ohashi, R.; Sugimoto, Y.; Minoda, T.; Murakami, T.: Study on Tensile Shear Strength of Dissimilar Lap Joints for Multi-Material Structures, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 41, No. 3, 2023, pp. 124-132 (in Japanese)

Publications

Serizawa, H.; Inose, K.; Ohashi, R.; Sugimoto, Y.; Minoda, T.; Murakami, T.: Study on Shear Fatigue Properties of Dissimilar Lap Joints for Multi-Material Structures, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 41, No. 3, 2023, pp. 133-140 (in Japanese)

Publications

Yamamoto, Y.; Shibuya, Y.; Oyori, H.; Muraoka, M.: Control Design under Limitation of Motor Current for Electric Fuel Metering System with Redundancy on Aircraft Electrification, SAE International Journal of Advances and Current Practices in Mobility, Vol. 5, No. 5, 2023, pp. 1841-1848

Publications

Yao, Y.; Nagasaka, Y.; Hayashi, T.; Kowashi, Y.: Enhancement of Detection Functions of 3D Laser Level-Crossing Obstruction Detecting System, Japanese Railway Engineering, Vol. 63, No. 1, 2023, pp. 7-9

Publications

Ikuta, Y.; Saito, H.; Ichikawa, Y.; Ogawa, K.; Ota, Y.; Sakakibara, Y.: Evaluation of Absorbed Energy in High-Velocity Particle Impact for Aero-Engine Materials, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 72, No. 2, 2023, pp. 112-119 (in Japanese)

Publications

Chen, G.; Hirohata, M.; Hyoma, K.; Matsumoto, N.; Inose, K.: Experimental comparison on load-carrying capacity of corner joints by laser-arc hybrid welding and arc welding, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 41, No. 4, 2023, pp. 1-4

Publications

Avola, C.; Suzuki, T.; May, I.; Tafreshi, A.; Tanigaki, M.; Williams, C.; Briscoe, K.; Gray, B.; Trudeau, J.; Iosifidis, G.; Durbiano, L.; Delavan, M.: VALIDATION OF A 1D MODELING TECHNIQUE TO PREDICT PERFORMANCE OF TURBOCHARGED ENGINES INCLUDING A DOUBLE SCROLL TURBINE WITH CONNECTION VALVE, Proceedings of ASME 2023 ICE Forward Conference, ICEF 2023, 2023

Publications

Kota, S.; Yasushi, T.; Takehiro, N.; Kazuhiro, K.; Takahiro, K.; Kyohei, N.; Noriko, S.; Akira, M.; Hiroyuki, H.; Takao, S.; Kazushige, O.; Junichi, I.; Masatsugu, Y.; Koju, N.; Hideo, I.; Kouji, O.; Tomoya, N.; Naoya, E.; Hirokazu, O.; Nobuyoshi, K.; Kyohei, H.; Kimihiko, T.: Nondestructive Evaluation of Long-Term Creep Damage and Its Availability in ASME Grade 91 Steel Welds, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 72, No. 10, 2023, pp. 705-712 (in Japanese)

Publications

Simmers, B.; Gerada, C.; Rajashekara, K.; Laskaridis, P.; Seki, N.: Special issue on all-electric and hybrid-electric flight, IET Electrical Systems in Transportation, Vol. 13, No. 1, 2023

Publications

Morita, K.: Fatigue Crack Initiation and Propagation Life of Non-load Carrying Welded Fillet Joint Estimated by Local Elasto-plasticity Response, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 92, No. 7, 2023, pp. 471-474 (in Japanese)

Publications

Shibukuwa, K.: Elastic-Plastic Analysis for Crossover Piping by Using ASME Code Case N-900 and JSME CODE CASE NC-CC-008, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 7, 2023