Publications

Yamashita, H.; Hayakawa, A.; Okafor, E.C.; Colson, S.; Somarathne, K.D.K.A.; Tsujimura, T.; Ito, S.; Uchida, M.; Kudo, T.; Kobayashi, H.: Optimum primary equivalence ratio for rich-lean two-stage combustion of non-premixed ammonia/methane/air and ammonia/hydrogen/air flames in a swirling flow, Fuel, Vol. 368, 2024

Publications

Suzuki, Y.; Arai, T.; Kawaguchi, S.; Taniguchi, M.; Inoue, K.; Akikubo, K.; Suzuki, R.; Tachibana, M.: Raman study on the pressure-induced phase transformation of nanographite at room temperature, Carbon, Vol. 225, 2024

Publications

Kusuda, S.; Yamasaki, N.; Inoue, C.; Namba, M.: Aircraft engine fan tone noise due to back-pressure distortion caused by a downstream pylon under high-speed conditions, Journal of Sound and Vibration, Vol. 572, 2024

Publications

Abe, D.; Torigata, K.; Izuno, H.; Demura, M.: Study of analysis method to predict creep life of 2.25Cr-1Mo steel from welding conditions, Welding in the World, Vol. 68, No. 5, 2024, pp. 1297-1311

Publications

Zhang, Y.; Marusawa, K.; Kudo, K.; Morooka, S.; Harjo, S.; Miyamoto, G.; Furuhara, T.: Multi-aspect Characterization of Low-temperature Tempering Behaviors in High-carbon Martensite, ISIJ International, Vol. 64, No. 2, 2024, pp. 245-256

Publications

Kitaoka, S.; Matsudaira, T.; Kawashima, N.; Ogawa, T.; Yamazaki, N.; Hosoya, N.; Nakamura, T.: Mass transfer in Yb3Al5O12 films at high temperatures under oxygen potential gradients, Journal of the European Ceramic Society, Vol. 44, No. 2, 2024, pp. 1188-1201

Publications

Sato, K.; Nomura, K.; Sakakibara, Y.; Shioda, Y.; Saito, N.: Microstructural Changes in 9Cr-1Mo-V-Nb Weld Metal after Aging at 1 013 K, ISIJ International, Vol. 64, No. 2, 2024, pp. 295-302

Publications

Yamashita, H.; Hayakawa, A.; Oku, K.; Colson, S.; Reibel, G.; Chen, Y.-R.; Somarathne, K.D.K.A.; Okafor, E.C.; Tsujimura, T.; Ito, S.; Uchida, M.; Kudo, T.; Kobayashi, H.: Visualization of liquid ammonia spray using 2p-SLIPI and comparison of liquid ammonia spray and gaseous ammonia combustion in a swirl combustor at atmospheric pressure, Fuel, Vol. 371, 2024

Publications

Chen, G.; Hirohata, M.; Hyoma, K.; Matsumoto, N.; Inose, K.: Deformation and residual stress of T-shaped joints fabricated by laser-arc hybrid welding for steel bridge members, Welding in the World, Vol. 68, No. 2, 2024, pp. 459-473

Publications

Izuno, H.; Demura, M.; Yamazaki, M.; Minamoto, S.; Sakurai, J.; Nagata, K.; Mototake, Y.-I.; Abe, D.; Torigata, K.: Search for high-creep-strength welding conditions considering HAZ shape factors for 2 1/4Cr–1Mo steel, Welding in the World, Vol. 68, No. 5, 2024, pp. 1313-1332

Publications

Tamaki, H.; Yamaguchi, S.: A Method for Preliminary Design of Variable Geometry Vaned Diffuser for Centrifugal Compressor, Journal of Turbomachinery, Vol. 146, No. 3, 2024

Publications

Kajihara, S.; Higuchi, R.; Aoki, T.; Fukushige, S.: Whipping motion of airplane composite fan blades due to bird strike, Advanced Composite Materials, Vol. 33, No. 4, 2024, pp. 581-602

Publications

Tsuruta, H.; Toda, H.; Hirayama, K.; Shimizu, K.; Fujihara, H.; Takeuchi, A.; Uesugi, M.: The spatial and temporal characterization of type IV creep fracture in notched specimen of modified 9Cr–1Mo steel, Materials Science and Engineering: A, Vol. 902, 2024

Publications

Arima, K.; Ito, T.; Marumoto, K.; Inose, K.; Yamamoto, M.: Effect of Bead Shape on Solidification Cracking during Hot-wire Laser Welding on Narrow-gap Joint of Ni-base Alloy, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 42, No. 2, 2024, pp. 89-96 (in Japanese)

Publications

Arce-Ramos, J.M.; Li, W.-Q.; Lim, S.H.; Chang, J.; Hashimoto, T.; Kamata, H.; Sullivan, M.B.; Borgna, A.; Chen, L.; Poh, C.K.; Zhang, J.: Investigating the deactivation and regeneration mechanism of Fe-based catalysts during CO₂ reduction to chemicals, Applied Catalysis B: Environmental, Vol. 347, 2024

Publications

Sato, K.; Mitsuhara, M.; Nagata, K.; Kubushiro, K.; Nomura, K.; Kimura, T.; Shioda, Y.; Sawada, K.; Kimura, K.; Nakashima, H.: Effect of impurity elements on the creep rupture strength of Gr. 91 steel welded joints at 650 °C, Materials Science and Engineering: A, Vol. 903, 2024

Publications

Kiga, T.: Greetings from the Chair of the JSME Power Energy Systems Division, Journal of Nuclear Engineering and Radiation Science, Vol. 10, No. 1, 2024

Publications

Fujisawa, N.; Ohta, Y.; Yamagami, M.; Goto, T.; Kato, D.: UNSTEADY FLOW STRUCTURE OF ROTATING INSTABILITY IN A 1.5-STAGE AXIAL COMPRESSOR, Proceedings of the ASME Turbo Expo, Vol. 12, 2024

Publications

Trinh, Q.N.; Tashiro, S.; Suga, T.; Yamaoka, H.; Inose, K.; Watanabe, K.; Hyoma, K.; Tanabe, Y.; Bui, V.H.; Tanaka, M.: Effect of oxygen in shielding gas on weldability in plasma-GMA hybrid welding process of high-tensile strength steel, International Journal of Advanced Manufacturing Technology, Vol. 134, No. 1-2, 2024, pp. 283-296

Publications

Sagara, K.; Fukada, T.; Tokuda, K.; Matsunaga, T.; Nikbin, K.; Shibanuma, K.: Integrated model for simulating Coble creep deformation and void nucleation/growth in polycrystalline solids − Part II: Validation for material design, Materials and Design, Vol. 244, 2024

Publications

Tanaka, T.; Inoue, F.; Osumi, H.; Murakami, H.: Special Issue on Advanced Robotic Technology and System for DX in Construction Industry, Journal of Robotics and Mechatronics, Vol. 36, No. 2, 2024, pp. 261-262

Publications

Yamazaki, K.; Tarumi, N.; Sato, I.; Tada, H.; Matsuura, H.: Oxidation Behavior of Platinum Group Alloys in Molten Glass, Electrochemistry, Vol. 92, No. 4, 2024

Publications

Oshio, T.; Aotsuka, M.; Kusuda, S.; Tateishi, A.: NUMERICAL INVESTIGATION OF THE INFLUENCE OF TYLER-SOFRIN MODES ON THE INCREASE IN BLADE UNSTEADY PRESSURE IN A SUBSONIC AXIAL COMPRESSOR, Proceedings of the ASME Turbo Expo, Vol. 10A, 2024

Publications

Kokubo, R.; Fujimura, S.; Yamamoto, M.; Oba, Y.: Numerical study of inlet distortion under crosswind conditions using OpenFOAM, AIAA Aviation Forum and ASCEND, 2024, 2024

Publications

Matsuura, Y.; Kinoshita, M.; Nitta, K.; Ikeda, H.; Ui, K.: Experimental estimation of the amount of residual slag remaining inside orbital insertion stage solid rocket motor, CEAS Space Journal, 2024

Publications

Watanabe, K.; Naito, H.; Kimoto, T.; Matsumura, M.; Takeshima, N.; Okada, S.; Ono, K.: Damage evaluation of steel columns using vibration testing and transfer learning, Bridge Maintenance, Safety, Management, Digitalization and Sustainability - Proceedings of the 12th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2024, 2024, pp. 1937-1945

Publications

Nonomura, S.: Research and Development and Practical Application of Welding Skill Transfer Methods, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 93, No. 2, 2024, pp. 111-114 (in Japanese)

Publications

Seki, N.; Inoue, T.: DEVELOPMENT OF AIRCRAFT SYSTEM ELECTRIFICATION AND HYBRID ELECTRIC PROPULSION, ICAS Proceedings, 2024

Publications

Kusuda, S.: TRANSONIC TURBOFAN TONE NOISE DUE TO BACK-PRESSURE DISTORTION CAUSED BY A DOWNSTREAM PYLON UNDER SUBSONIC TO TRANSONIC CONDITIONS, Proceedings of the International Congress on Sound and Vibration, 2024

Publications

Hattori, K.; Oki, K.; Sugita, A.; Sugiyama, T.; Chun, P.-J.: Deep learning-based corrosion inspection of long-span bridges with BIM integration, Heliyon, Vol. 10, No. 15, 2024

Publications

Yang, M.; Lu, Z.; Sato, W.; Kuwata, T.: BLADE EXCITATION ALLEVIATION OF A NOZZLELESS RADIAL TURBINE BY CASING TREATMENT BASED ON REDUCED ORDER MODEL, Proceedings of the ASME Turbo Expo, Vol. 9, 2024

Publications

Naoyuki, M.; Kengo, H.; Kosuke, W.; Koutarou, I.: Development of Laser Repair Welding for Steel Structures, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 93, No. 6, 2024, pp. 362-365 (in Japanese)

Publications

Xiaoyu, G.; Yujiro, T.; Mikihito, H.; Satoshi, M.; Seiji, O.: A Proposal of a Heat Input Model, for Heating Correction, on Welded Steel Structural Members, Acta Polytechnica Hungarica, Vol. 21, No. 5, 2024, pp. 35-52

Publications

Sakuragi, T.; Hamada, R.; Harigai, M.; Asano, H.; Oniki, T.; Ito, R.: Effect of 241Am buildup during spent fuel cooling on the decay heat of vitrified high-level waste and post-closure safety assessment, MRS Advances, Vol. 9, No. 7, 2024, pp. 415-419

Publications

Shibukawa, F.; Yamazaki, S.; Kaneshima, Y.; Murakami, H.; Endo, D.; Hashimoto, T.; Yamauchi, G.: Development of Wireless Communication Status Monitor Function for Mobile Robot Tele-Operation, Journal of Robotics and Mechatronics, Vol. 36, No. 2, 2024, pp. 365-374

Publications

Watanabe, F.; Yamanaka, S.; Noguchi, T.; Hirano, H.; Sato, H.; Makida, M.; Hojo, M.: DEVELOPMENT OF 1400°C(2552°F) CLASS CERAMIC MATRIX COMPOSITE TURBINE SHROUD AND DEMONSTRATION TEST WITH JAXA F7 AIRCRAFT ENGINE, Proceedings of the ASME Turbo Expo, Vol. 2, 2024

Publications

Torigata, K.; Abe, D.; Izuno, H.; Demura, M.: Macro Approach to Search for Welding Conditions to Extend Creep Life, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 93, No. 4, 2024, pp. 218-226 (in Japanese)

Publications

Omiya, M.; Sakakibara, Y.: Strain Evaluation Method around Triple Junctions Using Electron Backscatter Diffraction, Materials Transactions, Vol. 65, No. 7, 2024, pp. 754-762

Publications

Izuno, H.; Demura, M.; Yamazaki, M.; Minamoto, S.; Sakurai, J.; Nagata, K.; Mototake, Y.-I.; Abe, D.; Torigata, K.: Correction to: Search for high-creep-strength welding conditions considering HAZ shape factors for 2 1/4Cr–1Mo steel (Welding in the World, (2024), 68, 5, (1313-1332), 10.1007/s40194-024-01727-3), Welding in the World, 2024

Publications

Tokieda, K.; Ueno, T.; Unno, M.; Morita, I.: UNSTEADY COMPUTATIONAL FLUID DYNAMICS SIMULATION OF INLET FINS IN CENTRIFUGAL COMPRESSOR, Proceedings of the ASME Turbo Expo, Vol. 12, 2024

Publications

Nita, K.; Fujimoto, S.; Masaya, S.; Kazawa, J.; Okita, Y.: EFFECTS OF THE SHAPE MODIFICATION OF THE LEADING EDGE IMPINGEMENT COOLING FOR TURBINE BLADE, Proceedings of the ASME Turbo Expo, Vol. 8, 2024

Publications

Chu, Y.; Xiong, X.; Lou, Y.; Wang, P.; Duan, L.; He, Y.: Operational Hybrid Neural Network Model for NOx Forecast and Control in Real-World 2-GW Coal-Fired Power Plant, IEEE Transactions on Industrial Informatics, Vol. 20, No. 10, 2024, pp. 11806-11814

Publications

Adachi, T.; Takahashi, K.; Ishii, S.; Seki, N.; Oyori, H.: Thermodynamic analysis of a new electric environmental control system with energy recovery turbine, Journal of Thermal Science and Technology, Vol. 19, No. 1, 2024

Publications

Ren, P.; Stuart, C.; Zhang, M.; Inomata, R.; Nakamura, K.; Morita, I.; Spence, S.: Investigation of the Surrogate Model in an ANN-Meanline Hybrid Model for Radial Turbine Performance Prediction, International Journal of Gas Turbine, Propulsion and Power Systems, Vol. 15, No. 2, 2024, pp. 9-17

Publications

Gibson, L.; Leonard, T.; Iosifidis, G.; Modica, D.-V.D.; Ratz, J.; Ueno, T.: CENTRIFUGAL COMPRESSOR CASING TREATMENT DESIGN FOR A TURBOCHARGED HYDROGEN COMBUSTION ENGINE, Proceedings of the ASME Turbo Expo, Vol. 12, 2024

Publications

Matsuura, Y.; Matsuda, N.; Tashiro, Y.; Naka, T.: Investigation on Suppression of Hard Start Phenomena in Hypergolic Bipropellant Engine, AIAA SciTech Forum and Exposition, 2024, 2024

Publications

Sakai, T.; Suzuki, S.; Huang, H.: In-situ EBSD Observations of Bending for Heat-treated A2024, Journal of the Japan Society for Technology of Plasticity, Vol. 65, No. 761, 2024, pp. 89-92 (in Japanese)

Publications

Harigai, M.; Sakuragi, T.; Tanaka, S.; Asano, H.; Oniki, T.; Ito, R.: Impact on repository footprint of blending spent mixed oxide fuels with UO2 fuels during reprocessing, MRS Advances, Vol. 9, No. 7, 2024, pp. 387-390

Publications

Yamazaki, Y.; Yoshida, K.; Okada, K.; Arai, M.; Nakahara, Y.; Ota, Y.: Development of a small-punch-fatigue test method to evaluate fatigue strength and fatigue crack propagation, Journal of the Mechanical Behavior of Materials, Vol. 33, No. 1, 2024

Publications

Tsubota, S.; Tagashira, G.; Takeshima, R.; Kambara, A.: Construction of Umi-No-Mori Bridge Using Barges and Multi-Axle Transporters, Structural Engineering International, 2024

Publications

Ikeguchi, T.; Sudo, S.; Koguma, Y.; Nakata, M.: A Random Forest-Assisted Local Search for Expensive Permutation-based Combinatorial Optimization Problems, 2024 IEEE Congress on Evolutionary Computation, CEC 2024 - Proceedings, 2024

Publications

Wang, W.; Morita, J.; Sakurai, Y.; Ueno, T.; Morita, I.; Novo, P.G.; Sakaguchi, D.: Turbine performance improvement by the multi-objective optimization for variable nozzle vanes of turbocharger, Journal of Physics: Conference Series, Vol. 2707, No. 1, 2024

Publications

Gohl, I.; Bitter, M.; Sato, H.; Kožulović, D.: Experimental study on flow phenomena induced by trailing edge shapes for a transonic high pressure turbine cascade, International Journal of Gas Turbine, Propulsion and Power Systems, Vol. 15, No. 2, 2024, pp. 51-59

Publications

Hayasaka, T.; Miyagawa, K.; Lee, K.; Saito, A.; Shamoto, E.: “L-stock method” – High-efficiency high-chatter-stability high-precision thin-wall milling strategy with aggressive use of plunge milling, CIRP Annals, Vol. 73, No. 1, 2024, pp. 289-292

Publications

Nozaki, T.; Fukushima, Y.; Okada, S.; Takaya, Y.; Makabe, A.; Watanabe, M.: In situ gold adsorption experiment at an acidic hot spring using a blue-green algal sheet, Scientific Reports, Vol. 14, No. 1, 2024

Publications

Takahashi, K.; Zama, K.; Hiroi, N.F.: Ship trajectory prediction using AIS data with TransFormer-based AI, Proceedings - 2024 IEEE Conference on Artificial Intelligence, CAI 2024, 2024, pp. 1302-1305

Publications

Sato, K.; Nitta, K.; Yoshihara, T.; Harada, R.; Kawamoto, S.; Ikeda, H.; Kinoshita, M.; Ui, K.; Matsuura, Y.: Collision probability evaluation of SRM slag during orbital lifetime, Journal of Space Safety Engineering, 2024

Publications

Kato, T.; Kuroda, H.; Matsumoto, K.; Onaya, J.; Hosono, K.; Kaneo, H.; Yamaguchi, K.; Morimoto, M.; Yoshimoto, K.; Yamamoto, M.; Ota, Y.: Technologies for e-Mobility, IEEJ Transactions on Industry Applications, Vol. 144, No. 7, 2024, pp. 513-522 (in Japanese)

Publications

Kasumi, M.; Masashi, M.; Seiichiro, T.: Evaluation of Fatigue Crack Propagation Behavior in Low Carbon Steel and Their Simulated HAZ and Fatigue Life Assessment of Non-load Carrying Welded Fillet Joint, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 93, No. 5, 2024 (in Japanese)

Publications

Shibanuma, K.; Sagara, K.; Fukada, T.; Matsunaga, T.; Tokuda, K.; Matsunaga, T.; Nikbin, K.: Integrated model for simulating Coble creep deformation and void nucleation/growth in polycrystalline solids - Part I: Theoretical framework, Materials and Design, Vol. 244, 2024

Publications

Tominaga, K.; Daimon, Y.; Fujii, G.; Nagata, T.; Matsuura, Y.; Kano, Y.; Uchiyama, E.; Inoue, C.: Bipropellant Mixing at Vacuum Startup by Visualization Analysis and Optical Patternator, AIAA SciTech Forum and Exposition, 2024, 2024

Publications

Kawamoto, S.; Harada, R.; Joudoi, D.; Kimoto, Y.; Izumiyama, T.; Akahoshi, Y.: Estimation of ejecta generation and mitigation measures for large-scale structures on geostationary orbit, Journal of Space Safety Engineering, Vol. 11, No. 3, 2024, pp. 507-517

Publications

Sakura, R.; Takagi, Y.; Hayashi, G.; Yamaguchi, T.: Friction Coefficient of Slip Critical Bolted Joints with Inorganic Zinc-Rich Paint Focusing on Contact Surface Pressure, International Journal of Steel Structures, 2024

Publications

Yonemura, A.; Shimohara, N.; Tokieda, K.; Numakura, R.; Hattori, H.: Study on blade vibration of centrifugal compressor - Forced responses caused by casing treatment, Journal of Physics: Conference Series, Vol. 2707, No. 1, 2024

Publications

Kohama, T.; Asai, H.; Sato, W.: Development of Gas Turbine to Boost Output by 25% Without Changing Engine Size, International Journal of Gas Turbine, Propulsion and Power Systems, Vol. 15, No. 3, 2024, pp. 1-8

Publications

Ito, K.; Hida, S.; Kinugasa, T.; Chiba, K.; Okuda, Y.; Ichikawa, M.; Okoshi, T.; Takasaki, R.; Hayashi, R.; Yoshida, K.; Osuka, K.: Cam-Like Mechanism in Intertarsal Joints of Ratites and its Design Framework, Journal of Robotics and Mechatronics, Vol. 36, No. 2, 2024, pp. 406-414