論文

Wang, M.; Rahimi, M.; Kumar, A.; Hariharan, S.; Choi, W.; Hatton, T.A.: Flue gas CO₂ capture via electrochemically mediated amine regeneration: System design and performance, Applied Energy, Vol. 255, 2019

論文

Wanjara, P.; Watanabe, K.; De Formanoir, C.; Yang, Q.; Bescond, C.; Godet, S.; Brochu, M.; Nezaki, K.; Gholipour, J.; Patnaik, P.: Titanium Alloy Repair with Wire-Feed Electron Beam Additive Manufacturing Technology, Advances in Materials Science and Engineering, Vol. 2019

論文

Terao, Y.; Seta, A.; Ohsaki, H.; Oyori, H.; Morioka, N.: Lightweight Design of Fully Superconducting Motors for Electrical Aircraft Propulsion Systems, IEEE Transactions on Applied Superconductivity, Vol. 29, No. 5, 2019

論文

Yonekura, K.; Hattori, H.: Framework for design optimization using deep reinforcement learning, Structural and Multidisciplinary Optimization, Vol. 60, No. 4, 2019, pp. 1709-1713

論文

Ji, Y.; Tanaka, Y.; Tamura, Y.; Kimura, M.; Umemura, A.; Kaneshima, Y.; Murakami, H.; Yamashita, A.; Asama, H.: Adaptive Motion Planning Based on Vehicle Characteristics and Regulations for Off-Road UGVs, IEEE Transactions on Industrial Informatics, Vol. 15, No. 1, 2019, pp. 599-611

論文

Yano, D.; Ishikawa, S.; Tanaka, K.; Kijimoto, S.: Vibration analysis of viscoelastic damping material attached to a cylindrical pipe by added mass and added damping, Journal of Sound and Vibration, Vol. 454, 2019, pp. 14-31

論文

Suzuki, T.; Mahfuz, H.; Takanashi, M.: A new stiffness degradation model for fatigue life prediction of GFRPs under random loading, International Journal of Fatigue, Vol. 119, 2019, pp. 220-228

論文

Yamaguchi, K.; Member, K.K.; Yamada, T.; Sato, Y.: High Power Density SiC-Based Inverter with a Power Density of 70 kW/liter or 50 kW/kg, IEEJ Journal of Industry Applications, Vol. 8, No. 4, 2019, pp. 694-703

論文

Sun, Z.; Zheng, X.; Linghu, Z.; Kawakubo, T.; Tamaki, H.; Wang, B.: Influence of volute design on flow field distortion and flow stability of turbocharger centrifugal compressors, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol. 233, No. 3, 2019, pp. 484-494

論文

Shiraiwa, T.; Miyazawa, Y.; Enoki, M.: Prediction of fatigue strength in steels by linear regression and neural network, Materials Transactions, Vol. 60, No. 2, 2019, pp. 189-198

論文

Sun, Z.; Zheng, X.; Tamaki, H.; Kaneko, Y.: Flow instability suppression and deep surge delay by non-axisymmetric vaned diffuser in a centrifugal compressor, Aerospace Science and Technology, Vol. 95, 2019

論文

Okita, Y.; Mizokami, Y.; Hasegawa, J.: Experimental and Numerical Investigation of Environmental Barrier Coated Ceramic Matrix Composite Turbine Airfoil Erosion, Journal of Engineering for Gas Turbines and Power, Vol. 141, No. 3, 2019

論文

Wu, K.; Ito, K.; Shinozaki, I.; Chivavibul, P.; Enoki, M.: A comparative study of localized corrosion and stress corrosion cracking of 13Cr martensitic stainless steel using acoustic emission and X-ray computed tomography, Materials, Vol. 12, No. 16, 2019

論文

Atagi, Y.; Zhao, T.; Iso, Y.; Takei, M.: Real-Time Imaging of Particles Distribution in Centrifugal Particles-Liquid Two-Phase Fields by Wireless Electrical Resistance Tomography (WERT) System, IEEE Access, Vol. 7, 2019, pp. 12705-12713

論文

Takai, R.; Endo, N.; Hirohara, R.; Tsunoda, T.; Yoshida, M.: Experimental and numerical analysis of grain refinement effect on hot tearing susceptibility for Al–Mg alloys, International Journal of Advanced Manufacturing Technology, Vol. 100, No. 5-8, 2019, pp. 1867-1880

論文

Ligrani, P.; McInturff, P.; Suzuki, M.; Nakamata, C.: Winglet-pair target surface roughness influences on impingement jet array heat transfer, Journal of Enhanced Heat Transfer, Vol. 26, No. 1, 2019, pp. 15-35

論文

Schneider, J.; Carlson, R.; Sirota, J.; Sutton, R.; Taha, E.; Kesler, M.; Kamichi, K.; Teerlinck, I.; Abeta, H.; Minagawa, Y.; Yazaki, S.; Yoon, U.; Kawashima, K.; Muskett, S.; Bohn, T.; Mathar, S.; Mikat, D.; Guag, J.; Seidman, S.; Reitan, R.: Validation of wireless power transfer up to 11kW Based on SAE J2954 with bench and vehicle testing, SAE Technical Paper 2019-01-0868

論文

Imamura, J.; Takagi, K.; Nagaya, S.: Engineering analysis of turbulent flow measurements near Kuchinoshima Island, Journal of Marine Science and Technology (Japan), Vol. 24, No. 2, 2019, pp. 329-337

論文

Kashima, K.; Aoyama, H.; Ohta, Y.: Stable Process Approach to Analysis of Systems under Heavy-Tailed Noise: Modeling and Stochastic Linearization, IEEE Transactions on Automatic Control, Vol. 64, No. 4, 2019, pp. 1344-1357

論文

Zhao, T.; Iso, Y.; Ikeda, R.; Okawa, K.; Takei, M.: Real-time measurement of particle volume fraction in centrifugal fields by wireless electrical resistance detector, Flow Measurement and Instrumentation, Vol. 65, 2019, pp. 90-97

論文

Taniguchi, M.; Yoshie, R.; Akikubo, K.; Tateno, A.; Hotozuka, K.; Kawaguchi, N.; Uchida, T.; Tanimura, M.; Tachibana, M.: Effect of nitrogen and iron in carbon nanowalls on oxygen reduction reaction, Electrochimica Acta, Vol. 306, 2019, pp. 132-142

論文

Umemura, M.; Islam, M.R.; Fukumura, H.; Sato, I.; Kawabata, Y.; Matsuo, K.; Nakakaji, R.; Nagasako, A.; Ohtake, M.; Takayuki, F.; Yokoyama, U.; Nakayama, T.; Eguchi, H.; Ishikawa, Y.: Simultaneous hyperthermia-chemotherapy effect by arterial injection of Fe(Salen) for femur tumor, Cancer Science, Vol. 110, No. 1, 2019, pp. 356-365

論文

Wu, K.; Briffod, F.; Ito, K.; Shinozaki, I.; Chivavibul, P.; Enoki, M.: In-situ observation and acoustic emission monitoring of the initiation-to-propagation transition of stress corrosion cracking in SUS420J2 stainless steel, Materials Transactions, Vol. 60, No. 10, 2019, pp. 2151-2159

論文

Nakagaki, T.; Isogai, H.; Sato, H.; Arakawa, J.: Updated e-NRTL model for high-concentration MEA aqueous solution by regressing thermodynamic experimental data at high temperatures, International Journal of Greenhouse Gas Control, Vol. 82, 2019, pp. 117-126

論文

Hirohata, M.; Takeda, F.; Suzaki, M.; Inose, K.; Matsumoto, N.; Abe, D.: Influence of laser-arc hybrid welding conditions on cold cracking generation, Welding in the World, Vol. 63, No. 5, 2019, pp. 1407-1416

論文

Igarashi, S.; Matsuura, Y.; Hatai, K.; Ikeda, H.: Safe 0.5n green monopropellant thruster for small satellite propulsion systems, AIAA Propulsion and Energy Forum and Exposition, 2019, 2019

論文

Morii, T.; Tanaka, Y.; Watanabe, S.; Ohashi, S.; Matsunaga, Y.: Suction performance and cavitation instabilities of turbopumps with three different inducer design, International Journal of Fluid Machinery and Systems, Vol. 12, No. 2, 2019, pp. 128-135

論文

Tsukui, T.; Hirata, S.; Hachiya, H.: Quantitative evaluation for variability characteristics of reflected sound waves from sea surface, Japanese Journal of Applied Physics, Vol. 58, 2019

論文

Kota, K.; Shigetaka, O.; Shotaro, Y.; Daisuke, A.; Akira, T.; Shinnosuke, Y.; Atsushi, T.: Investigation of Standardizing for Evaluation Method of Transverse Varestraint Test, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 37, No. 4, 2019, pp. 200-207 (in Japanese)

論文

Kimura, T.; Shioda, Y.; Kubushiro, K.: Internal pressure creep damage of KA-SUS304J1HTB, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 68, No. 2, 2019, pp. 142-147 (in Japanese)

論文

Takahashi, Y.; Matsunaga, M.; Oshima, N.; Yamada, K.: Drag behavior of inflatable reentry vehicle in transonic regime, Journal of Spacecraft and Rockets, Vol. 56, No. 2, 2019, pp. 577-585

論文

Ouchi, K.; Yoshida, T.; Yang, C.-S.: A Theory of Multiaperture Along-Track Interferometric Synthetic Aperture Radar, IEEE Geoscience and Remote Sensing Letters, Vol. 16, No. 10, 2019, pp. 1565-1569

論文

Kanazawa, S.; Yamazaki, N.; Kishi, T.; Kubushiro, K.: Influences of heat treatments on the strength properties of amorphous SiC fibers, Advanced Composite Materials, Vol. 28, No. 5, 2019, pp. 491-506

論文

Sawada, K.; Sekido, K.; Kimura, K.; Arisue, K.; Honda, M.; Komai, N.; Fukuzawa, N.; Ueno, T.; Shimohata, N.; Nakatomi, H.; Takagi, K.; Kimura, T.; Nomura, K.; Kubushiro, K.: Effect of initial microstructure on creep strength of ASME grade T91 steel, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 105, No. 4, 2019, pp. 23-32 (in Japanese)

論文

Fukuda, M.; Yagi, Y.; Fukutomi, H.; Nishinoiri, S.; Sato, K.; Nishii, T.; Nishimaki, K.; Takano, T.; Aoki, H.; Okuma, Y.; Furukawa, T.; Shimada, M.; Saito, N.; Hashimoto, K.; Kitamura, M.; Saito, E.; Semba, H.; Matsubara, Y.; Takahashi, K.; Takahashi, T.; Suga, T.: 700℃ A-USC TECHNOLOGY DEVELOPMENT IN JAPAN, Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials - Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials, 2019, pp. 1487-1499

論文

Homma, T.; Takano, H.; Ozaki, T.: Nanostructural analysis of welded Ti–6Al–4V by linear friction welding applied for blisk assemblies, Materialia, Vol. 5, 2019

論文

Shima, K.; Sato, N.; Funato, Y.; Fukushima, Y.; Momose, T.; Yukihiro, S.: Identification of film-forming species during SiC-CVD of CH3SiCl3/H2 by exploiting deep microtrenches, ECS Journal of Solid State Science and Technology, Vol. 8, No. 8, 2019, pp. P423-P429

論文

Goto, T.; Oshio, T.; Tani, N.; Aotsuka, M.; Pallot, G.; Kato, D.: Effect of turbulence model on the prediction of performance and span-wise mixing in high-speed highly-loaded multi-stage axial-flow compressor, Proceedings of the ASME Turbo Expo, Vol. 2, 2019

論文

Kadoi, K.; Okano, S.; Yamashita, S.; Abe, D.; Takemori, A.; Yamada, S.; Takada, A.; Kawata, J.: Investigation of standardizing for evaluation method of transverse-Varestraint test, Welding International, Vol. 33, No. 4-6, 2019, pp. 189-199

論文

Funazaki, K.-I.; Murakami, D.; Okamura, Y.: Parametric studies on aerodynamic performance of various types of LP turbine airfoils for aero-engines under the influence periodic wakes and freestream turbulence, Proceedings of the ASME Turbo Expo, Vol. 2, 2019

論文

Takai, R.; Hirohara, R.; Endo, N.; Nagata, Y.; Okane, T.; Yoshida, M.: Controlling factor for maximum tensile stress and elongation of aluminum alloy during partial solidification, Materials Transactions, Vol. 60, No. 11, 2019, pp. 2406-2415

論文

Sato, R.; Morishita, K.; Nishida, I.; Shirase, K.; Hasegawa, M.; Saito, A.; Iwasaki, T.: Improvement of simultaneous 5-axis controlled machining accuracy by CL-data modification, International Journal of Automation Technology, Vol. 13, No. 5, 2019, pp. 583-592

論文

Shioda, Y.; Kubushiro, K.; Murata, Y.: Difference in the effect of cold working and tempering on microstructure of Mod.9Cr1Mo Steel, Materials Transactions, Vol. 60, No. 6, 2019, pp. 921-928

論文

Nakai, K.; Nishida, H.; Asaumi, N.; Tanaka, Y.; Matsuno, T.: Development of engineering model providing body force distribution of Tri-electrode Plasma actuator, Transactions of the Japan Society for Aeronautical and Space Sciences, Vol. 62, No. 5, 2019, pp. 247-255

論文

Yonekura, K.; Kanno, Y.: A Heuristic Method Using Hessian Matrix for Fast Flow Topology Optimization, Journal of Optimization Theory and Applications, Vol. 180, No. 2, 2019, pp. 671-681

論文

Masaki, K.; Saito, H.; Nezaki, K.; Kitamoto, S.; Sato, Y.S.; Kokawa, H.: Material Flow and Microstructure Evolution in Corner Friction Stir Welding of 5083 Al Alloy Using AdStir Technique, Minerals, Metals and Materials Series, 2019, pp. 181-188

論文

Nie, J.; Sugimoto, H.; Ono, K.; Miyashita, T.; Matsumura, M.; Okada, S.: An experimental study on the local buckling strength of an SBHS700 stub column with cruciform section: With an overview of the mechanical properties of SBHS700, Steel Construction, Vol. 12, No. 2, 2019, pp. 82-90

論文

Suzuki, K.; Sakamoto, S.; Yoshizawa, S.; Tsukui, T.; Saito, T.: Multipath and doppler shift modeling under highly reflective environment for underwater acoustic communication, OCEANS 2019 MTS/IEEE Seattle, OCEANS 2019, 2019

論文

Nishi, T.; Manako, T.; Ohnuma, K.; Ohta, H.; Sukenaga, S.; Shibata, H.; Oniki, T.: Thermal conductivity of Na2O–B2O3–SiO2 melts, Journal of Nuclear Science and Technology, Vol. 56, No. 8, 2019, pp. 710-715

論文

Kanna, S.; Yamashita, Y.; Kawabata, T.; Tagawa, T.; Imai, Y.; Mikami, Y.; Kitano, H.; Kayamori, Y.; Tonan, T.; Sakurai, T.; Kyono, S.; Ohata, M.; Minami, F.; Aihara, S.; Hagihara, Y.: Assessment of finite element analyses of load mode (bending vs. tension) effects for mitigation of judgment on pop-ins caused by splits, Engineering Fracture Mechanics, Vol. 205, 2019, pp. 28-39

論文

Yamazaki, N.; Nomura, K.; Kubushiro, K.: Creep-fatigue damage for boiler header stub mock-up specimen of 47Ni-23Cr-23Fe-7W alloy, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 68, No. 2, 2019, pp. 136-141 (in Japanese)

論文

Masuda, S.; Shimizu, F.; Fuchiwaki, M.; Tanaka, K.: Modelling and reducing fuel flow pulsation of a fuel-metering system during pump mode switching in a turbofan engine, IOP Conference Series: Earth and Environmental Science, Vol. 240, No. 5, 2019

論文

Yamada, T.; Ohata, M.: Ductile damage model based on void growth analysis by unit cell, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 37, No. 1, 2019, pp. 59-67 (in Japanese)

論文

Azuma, N.; Kojima, M.; Kobayashi, T.; Okita, K.; Motomura, T.; Niiyama, K.: The development status of le-9 engine turbopumps for h3 launch vehicle, AIAA Propulsion and Energy Forum and Exposition, 2019, 2019

論文

Uchiyama, T.; Kohzai, M.; Miki, H.; Hirotani, T.; Sudani, N.; Shutoku, H.: Experimental investigation of a 160% scaled nasa common research model at low speed conditions, AIAA Scitech 2019 Forum, 2019

論文

Tsuruta, H.; Toda, H.; Yatomi, M.; Yoshida, K.; Takeuchi, A.; Uesugi, M.; Tabuchi, M.; Hongou, H.: Quantitative evaluation of creep voids in Mod.9Cr-1Mo steel welded joints with X - Ray micro-tomography, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 68, No. 8, 2019, pp. 599-606 (in Japanese)

論文

Ishiharada, S.; Fukuhara, M.; Hayashida, K.; Higuchi, T.; Takamatsu, T.; Miyabe, K.; Nakao, M.: Effect of injection port position on pneumatic conveying characteristics of suction nozzle with injection pipe, Journal of the Society of Powder Technology, Japan, Vol. 56, No. 5, 2019, pp. 254-260 (in Japanese)

論文

Haruyama, D.; Onodera, S.; Okabe, T.: Micromechanics modeling of tensile/shear behavior and crack density of composite materials, ICCM International Conferences on Composite Materials

論文

Inoue, M.; Takai, Y.; Yanagihara, M.; Durmaz, M.; Kara, A.; Kroon, I.B.: Active protection system for Main cable of suspension bridge against HGV or Hazardous material fires, IABSE Symposium, Guimaraes 2019: Towards a Resilient Built Environment Risk and Asset Management - Report, 2019, pp. 131-137

論文

Akikubo, K.; Kawaguchi, N.; Tachibana, M.: Synthesis of metal oxide nanowall structures using a carbon nanowall template, Japanese Journal of Applied Physics, Vol. 58, No. 9, 2019

論文

Suzuki, T.; Fukushige, S.; Tsunori, M.: Load path visualization for fiber trajectory optimization of additive manufacturing composites, ICCM International Conferences on Composite Materials

論文

Komeda, M.; Nie, J.; Ono, K.; Miyashita, T.; Okada, S.: An experimental study on buckling behavior of cruciform columns made of SBHS400, Proceedings of the International Offshore and Polar Engineering Conference, Vol. 4, 2019, pp. 4816-4822

論文

Shioda, Y.; Nakagawa, H.; Nomura, K.; Yamazaki, N.; Kubushiro, K.: CREEP DAMAGE ASSESSMENT OF 47NI-23CR-23FE-7W ALLOY, Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials - Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials, 2019, pp. 592-602

論文

Matsuura, K.; Matsui, K.; Tani, N.; Goto, T.: Interaction of wake disturbance with compressible transitional boundary layers in a low-pressure turbine ascade under rotor-stator interaction, Energy Procedia, Vol. 160, 2019, pp. 68-75

論文

Ito, S.; Uchida, M.; Fujimori, T.; Kobayashi, H.: NOx emission of two-stage combustor for ammonia/natural gas Co-fired gas turbine, 12th Asia-Pacific Conference on Combustion, ASPACC 2019, 2019

論文

Takanashi, M.; Ueda, H.; Saito, T.; Ogawa, T.; Hayashi, K.: Discussion on crack growth behavior in large-scale fatigue tests of carbon and low-alloy steel plates based on fracture surface observation, Procedia Structural Integrity, Vol. 19, 2019, pp. 275-283

論文

Otani, A.; Nakamura, I.; Watakabe, T.; Morishita, M.; Shibutani, T.; Shiratori, M.: Applicability of seismic fatigue evaluation by JSME code case, NC-CC-008, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 8, 2019

論文

Kim, J.-H.; Eguchi, H.; Umemura, M.; Ishikawa, Y.: Hybrid metal complex nanocomposites for targeted cancer diagnosis and therapeutics, Materials for Biomedical Engineering: Inorganic Micro- and Nanostructures, 2019, pp. 427-461

論文

Takada, K.; Yoshizawa, S.; Tsukui, T.; Saito, T.: Multipath error reduction for underwater acoustic direction of arrival estimation, OCEANS 2019 MTS/IEEE Seattle, OCEANS 2019, 2019

論文

Ozasa, H.; Asakawa, E.; Murakami, F.; Hondori, E.J.; Takekawa, J.; Mikada, H.: Realization of high signal-to-noise ratio offshore seismic survey with interferometric approach, 2018 SEG International Exposition and Annual Meeting, SEG 2018, 2019, pp. 4211-4215

論文

Asada, S.; Zhang, S.; Takanashi, M.; Nomura, Y.: Study on incorporation of a new design fatigue curve into the JSME environmental fatigue evaluation method, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 3, 2019

論文

Mihara, R.: Net shape HIP technology for rocket engine parts, Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, Vol. 66, No. 8, 2019, pp. 391-394 (in Japanese)

論文

Morii, T.; Tanaka, Y.; Watanabe, S.; Ohashi, S.; Matsunaga, Y.: Experimental investigation on suction performance and cavitation instabilities of turbopumps with two different inducers, IOP Conference Series: Earth and Environmental Science, Vol. 240, No. 3, 2019

論文

Abe, D.; Murakami, Y.; Matsuoka, T.: Welding technology for A-USC boiler, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 88, No. 4, 2019, pp. 252-256 (in Japanese)

論文

Ichinose, A.; Takeda, T.; Miyagawa, K.; Ogawa, Y.; Negishi, H.; Niiyama, K.: Unsteady flow in the vaned diffuser of a low specific speed centrifugal pump with an unshrouded impeller, ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019, Vol. 3, 2019

論文

Kohzai, M.; Yokokawa, Y.; Takaishi, T.; Ito, Y.; Yamamoto, K.; Omotani, H.; Kato, T.; Hirai, T.: Flap surface pressure measurements with 3D printed pressure belts in FQUROH flight demonstration, AIAA Scitech 2019 Forum, 2019

論文

Sakakibara, Y.; Shinozaki, I.; Nakayama, G.; Nan-Nichi, T.; Fujii, T.; Shimamura, Y.; Tohgo, K.: Monte carlo simulation based on scc test results in hydrogenated steam environment for alloy 600, Minerals, Metals and Materials Series, 2019, pp. 1551-1561

論文

Nishi, T.; Ohnuma, K.; Tanaka, K.; Manako, T.; Yamato, Y.; Ohta, H.; Sukenaga, S.; Shibata, H.; Kakihara, T.: Thermal conductivities of alkali–silicate and calcium–alkali–silicate melts, Journal of Non-Crystalline Solids, Vol. 511, 2019, pp. 36-40

論文

Shibuya, Y.; Oyori, H.; Sugawara, H.; Seki, N.: Flight Optimization Model on Global and Interval Ranges for Conceptual Studies of MEA Systems, SAE Technical Paper 2019-01-1906

論文

Doi, Y.; Ji, Y.; Tamura, Y.; Ikeda, Y.; Umemura, A.; Kaneshima, Y.; Murakami, H.; Yamashita, A.; Asama, H.: Robust path planning against pose errors for mobile robots in rough terrain, Advances in Intelligent Systems and Computing, Vol. 867, 2019, pp. 27-39

論文

Takanashi, M.; Ueda, H.; Saito, T.; Ogawa, T.; Hayashi, K.: Development of new design fatigue curves in Japan: Discussion of crack growth behavior in large-scale fatigue tests of carbon and low-alloy steel plates, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 3, 2019

論文

Adachi, T.; Seki, N.; Oyori, H.; Muraoka, M.: Energy Recovery Rate from an Electric Air-Cycle System under the Cruising Altitude and Speed, SAE Technical Paper 2019-01-1905

論文

Nomura, K.; Kubushiro, K.; Nakagawa, H.; Nishimoto, Y.; Yamaguchi, T.; Mihune, H.: ESTABLISHING INDUCTION BENDING TECHNIQUE FOR NI-BASED ALLOY HR6W LARGE PIPING, Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials - Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials, 2019, pp. 869-879

論文

Tamaki, H.: A Study on Matching between Centrifugal Compressor Impeller and Low Solidity Diffuser and Its Extension to Vaneless Diffuser, Journal of Engineering for Gas Turbines and Power, Vol. 141, No. 4, 2019

論文

Kusaka, K.; Shirasaka, K.; Yonekura, D.; Tanaka, Y.: Residual stress measurement of {112}-oriented CrN layers in CrN/Cr multilayer films, Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics, Vol. 37, No. 6, 2019

論文

Sato, H.; Ueda, Y.; Andoh, M.; Honda, T.: Validation of fracture prediction model to design CMC turbine vane, Proceedings of the ASME Turbo Expo, Vol. 6, 2019

論文

Jin, Y.; Sugimoto, N.; Nishizawa, T.; Yoshitomi, T.; Sawada, A.; Sarae, W.; Hattori, A.; Yamasaki, Y.; Okamoto, H.; Sato, K.: Measurement of water mist particle size generated by rocket launch using a two-wavelength multi-static lidar, Applied Optics, Vol. 58, No. 23, 2019, pp. 6274-6279

論文

Ito, G.; Kawashima, R.; Komurasaki, K.; Koizumi, H.: Inflow angular dependence of the capture coefficient in cryopumps, Vacuum, Vol. 160, 2019, pp. 102-108

論文

Takehisa, Y.; Mitsuru, O.: Application of damage model based on void growth analysis to ductile crack growth simulation, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 37, No. 3, 2019, pp. 115-124 (in Japanese)

論文

Okita, Y.; Mizokami, Y.; Hasegawa, J.: Erosion testing of environmental-barrier-coated CMC and its behavior on an aero-engine turbine vane under particle-laden hot gas stream, Proceedings of the ASME Turbo Expo, Vol. 2, 2019

論文

Takai, R.; Yoshida, M.: Hot tearing prediction of casting via thermal stress analysis, Keikinzoku/Journal of Japan Institute of Light Metals, Vol. 69, No. 8, 2019, pp. 400-409 (in Japanese)

論文

Ishii, T.; Nagai, K.; Oinuma, H.; Oishi, T.; Ishii, Y.: Jet noise reduction of turbofan engine by notched nozzle, INTER-NOISE 2019 MADRID - 48th International Congress and Exhibition on Noise Control Engineering, 2019

論文

Shiomi, K.: Study on seismic designs controlling locations of failure inside steel frame structures under severe ground motions, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 8, 2019

論文

Yamada, T.; Ohata, M.: Proposal of ductile damage model based on unit cell analysis for prediction of ductile crack growth resistance of cracked component, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 3, 2019

論文

Fujimori, T.; Watanabe, H.: R&D of combustion simulation platform for advanced industrial design processes by academia-industry cooperation, 12th Asia-Pacific Conference on Combustion, ASPACC 2019, 2019

論文

Ako, Y.; Takahashi, Y.; Fujiwara, K.; Jikumaru, T.: Deterioration of magnetic property of permendur due to laminating process for improvement of power density in permanent magnet motors, International Journal of Applied Electromagnetics and Mechanics, Vol. 61, No. 1, 2019, pp. S97-S106

論文

Kushida, S.; Asada, K.; Fujii, K.; Tatsukawa, T.; Sakamoto, K.: Some consideration on the aerodynamic design of blast wave simulator using a shock tube system, ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, AJKFluids 2019, Vol. 1, 2019

論文

Hirohata, M.; Takeda, F.; Inose, K.; Matsumoto, N.; Daisuke, A.B.E.: Mechanical evaluation on cold cracking of laser-arc hybrid welding by restraint strain, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 37, No. 1, 2019, pp. 68-80 (in Japanese)

論文

Lu, K.; Katsuyama, J.; Li, Y.; Miyamoto, Y.; Itabashi, Y.; Suzuki, M.; Hirota, T.; Nagai, M.; Kanto, Y.: Verification of a probabilistic fracture mechanics code PASCAl4 for reactor pressure vessesls, International Conference on Nuclear Engineering, Proceedings, ICONE

論文

Ozasa, H.; Asakawa, E.; Murakami, F.; Hondori, E.J.; Takekawa, J.; Mikada, H.: Survey performance of deeply-towed marine seismic vibrator–Comparative Study with imaging results from an airgun array, SEG Technical Program Expanded Abstracts, 2019, pp. 57-61

論文

Prayitno, Y.A.K.; Iso, Y.; Zhao, T.; Takei, M.: Distribution of particle sedimentation thickness in rotating separation system using wireless electrical resistance detector, International Conference on Nuclear Engineering, Proceedings, ICONE

論文

Kai, S.; Otani, A.: Failure modes of piping systems under seismic loading and evaluation, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 8, 2019

論文

Ishikawa, A.; Liu, Z.; Zhang, H.; Chen, Q.: Energy Storage By Sand in Fluidized BED, Fluidization XVI, 2019, pp. 331-332

論文

Ohuchida, S.; Seo, S.; Okita, Y.: A steady state thermal prediction method for ship board turbocharger and its validation with experiments, Proceedings of the ASME Turbo Expo, Vol. 5, 2019

論文

Kusaka, K.; Shirasaka, K.; Yonekura, D.; Tanaka, Y.: Measurement of the residual stress in chromium nitride coatings deposited on an aluminum alloy substrate using arc ion plating method, Journal of Vacuum Science and Technology B: Nanotechnology and Microelectronics, Vol. 37, No. 6, 2019

論文

Ito, S.; Kanda, K.: The first practical full-HD cryogenic tank visualization system in the world, IGT International Liquefied Natural Gas Conference Proceedings, Vol. 2, 2019

論文

Nakayama, G.: Corrosion resistance of the weld, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 88, No. 7, 2019, pp. 554-561 (in Japanese)

論文

Park, J.-H.; Yang, C.-S.; Harun-Al-Rashid, A.; Ouchi, K.: Removal of different types of noises in synthetic aperture radar (SAR) images for improved ship detection, International Geoscience and Remote Sensing Symposium (IGARSS)

論文

Kanno, N.; Higashi, M.; Ozaki, T.; Tsuno, N.; Yamane, K.; Takahashi, S.: EFFECT OF PRIOR PARTICLE BOUNDARY ON DEFORMABILITY OF POWDER PROCESSED TURBINE DISK ALLOY, Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials - Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials, 2019, pp. 470-478

論文

Terao, Y.; Ishida, Y.; Ohsaki, H.; Oyori, H.: Electromagnetic Characteristic Comparison of Superconducting Synchronous Motor Characteristics for Electric Aircraft Propulsion Systems, SAE Technical Paper 2019-01-1912

論文

Ura, H.; Shigemi, M.; Hirotani, T.; Homma, T.: A method of wall interference correction for kevlar wall test section, 25th AIAA/CEAS Aeroacoustics Conference, 2019, 2019

論文

Takakura, D.; Fukazawa, H.; Tsunori, M.: Ross-sectional mapping of residual stresses using the contour method, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 88, No. 6, 2019, pp. 472-475 (in Japanese)

論文

Sato, N.; Ueno, S.-I.; Ohno, E.; Tamura, M.; Ueki, Y.; Yoshiie, R.; Naruse, I.: Effects of mechanical stresses around single tube on ash shedding in pulverized coal combustor, Proceedings of the Combustion Institute, Vol. 37, No. 3, 2019, pp. 2875-2882

論文

Ikaida, H.; Yamashiro, R.; Hara, T.; Ui, K.; Imoto, T.; Nanba, K.; Maeda, K.; Yoshie, Y.: Epsilon's development and launch for multiple small satellites mission, Proceedings of the International Astronautical Congress, IAC

論文

Koga, S.; Tamura, M.; Kimoto, K.: Development of low-cost hypergolic propulsion systems in IHI aerospace, Proceedings of the International Astronautical Congress, IAC

論文

Sato, K.; Hanada, M.; Yoshimura, Y.; Hanada, T.; Izumiyama, T.; Shinohara, R.: The optimal collision avoidance maneuver with multiple objects in Geo, Proceedings of the International Astronautical Congress, IAC

論文

Kojima, T.; Sugahara, M.; Shirouchi, Y.; Fukumoto, H.; Iwata, A.; Oyori, H.: Gradationally Controlled Voltage Inverter for More Electric Aircrafts, SAE Technical Paper 2019-01-1913

論文

Ise, T.; Fujimoto, T.; Hoshino, T.; Sakamoto, M.; Yagi, K.; Imoto, T.: The first ride-share mission for epsilon launch vehicle and its future plans, Proceedings of the International Astronautical Congress, IAC

論文

Yamada, T.; Ohata, M.: Application of damage model based on void growth analysis to ductile crack growth simulation, Welding International, Vol. 33, No. 1-3, 2019, pp. 30-41

論文

Yamashita, Y.; Murakami, T.; Akizuki, Y.: Crack growth arrester using "gourd-shaped-insert-plate", Procedia Structural Integrity, Vol. 19, 2019, pp. 123-129

論文

Morita, Y.; Yamashiro, R.; Yamaguchi, H.; Tanaka, K.; Ohtsuka, H.: Innovative guidance and control design of the versatile orbit transfer space vehicle of the epsilon rocket, Advances in the Astronautical Sciences, Vol. 168, 2019, pp. 1425-1432

論文

Nagaya, S.: Development of floating type ocean current power generation, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 88, No. 1, 2019, pp. 63-66 (in Japanese)

論文

Obuchi, K.; Watanabe, F.; Kuroki, H.; Arai, K.: Impact of foreign object damage to leading edge on fatigue capability of CMC turbine vanes, Proceedings of the ASME Turbo Expo, Vol. 6, 2019

論文

Tanaka, Y.; Kubushiro, K.: ANISOTROPIC MECHANICAL PROPERTIES OF EBM MANUFACTURED ALLOY 718, Joint EPRI-123HiMAT International Conference on Advances in High-Temperature Materials - Proceedings from EPRI's 9th International Conference on Advances in Materials Technology for Fossil Power Plants and the 2nd International 123HiMAT Conference on High-Temperature Materials, 2019, pp. 836-841