Change
Location

現在は日本サイトをご利用中です

地域統括拠点ウェブサイト

その他

表彰／論文

2023年度

論文: Kawarasaki, T.; Sakakibara, Y.: Development of ammonia SCC test equipment for low temperature and pressure, Ammonia Plant Safety and Related Facilities

論文: Maruyama, M.; Tomura, S.; Yasuda, K.; Ohmura, R.: Zero emissions, low-energy water production system using clathrate hydrate: Engineering design and techno-economic assessment, Journal of Cleaner Production, Vol. 383, 2023

論文: Naito, K.; Seki, Y.; Inoue, R.: Static and Fatigue Tensile Properties of Cross-Ply Carbon-Fiber-Reinforced Epoxy-Matrix-Composite Laminates with Thin Plies, Journal of Composites Science, Vol. 7, No. 4, 2023

論文: Chen, G.; Hirohata, M.; Sakai, N.; Hyoma, K.; Matsumoto, N.; Inose, K.: Charpy absorbed energy in simulated heat-affected zone of laser-arc hybrid welded joints by high-strength steel for bridge structures, International Journal of Advanced Manufacturing Technology, Vol. 127, No. 5-6, 2023, pp. 2655-2669

論文: Fujisaku, Y.; Naito, H.; Kimoto, T.; Matsumura, M.; Takeshima, N.; Okada, S.; Ono, K.: A Study on Damage Evaluation Method for Box Section Steel Columns Using Autoencoder, Proceedings of the International Offshore and Polar Engineering Conference, 2023, pp. 3215-3221

論文: Nakamura, H.; Zhang, J.; Hirose, K.; Shimoyama, K.; Ito, T.; Kanaumi, T.: Generating simplified ammonia reaction model using genetic algorithm and its integration into numerical combustion simulation of 1 MW test facility, Applications in Energy and Combustion Science, Vol. 15, 2023

論文: Kitaoka, S.; Tanaka, M.; Kawashima, N.; Ito, T.; Yokoe, D.; Kato, T.; Ogawa, T.; Yamazaki, N.; Hosoya, N.; Nakamura, T.: CMAS degradation of ytterbium aluminum garnets, Journal of the American Ceramic Society, Vol. 106, No. 8, 2023, pp. 4863-4876

論文: Shibabuma, K.; Fukada, T.; Yasumoto, H.; Tokuda, K.; Kim, B.-N.; Nikbin, K.: Representative volume element model for quantitatively predicting the influence of 3D polycrystalline morphology on Coble creep deformation, Materials and Design, Vol. 226, 2023

論文: Ito, Y.; Watanabe, T.; Seki, N.; Hirakawa, K.; Inoue, T.; Himeno, T.: Effect of Channel Size on Air-Cooling Performance in Interior Permanent Magnet Motor Driving Aviation Fans at High Altitude, Journal of Engineering for Gas Turbines and Power, Vol. 145, No. 4, 2023

論文: Ito, K.; Kinugasa, T.; Chiba, K.; Okuda, Y.; Takasaki, R.; Hida, S.; Okoshi, T.; Hayashi, R.; Yoshida, K.; Osuka, K.: The robotic approach to the passive interlocking mechanism in the hindlimb musculoskeletal system of Crocodylus porosus, Advanced Robotics, Vol. 37, No. 18, 2023, pp. 1187-1197

論文: Ren, P.; Stuart, C.; Spence, S.; Inomata, R.; Kobayashi, T.; Morita, I.: Using Machine Learning for Loss Prediction in a Hybrid Meanline Modeling Method to Deliver Improved Radial Turbine Performance Prediction, Journal of Turbomachinery, Vol. 145, No. 7, 2023

論文: Yonekura, K.; Hattori, H.; Shikada, S.; Maruyama, K.: Turbine blade optimization considering smoothness of the Mach number using deep reinforcement learning, Information Sciences, Vol. 642, 2023

論文: Chen, G.; Sakai, N.; Hirohata, M.; Hyoma, K.; Matsumoto, N.; Inose, K.: Bending Fatigue Characteristics of Butt Joints by Laser-Arc Hybrid Welding for Steel Bridge Members, Lecture Notes in Mechanical Engineering, 2023, pp. 904-916

論文: Nosseir, A.E.S.; Cervone, A.; Pasini, A.; Igarashi, S.; Matsuura, Y.: ADDITIVELY MANUFACTURED GREEN PROPELLANT TANKS: VOLUME EFFICIENT DESIGNS AND MATERIALS CHEMICAL COMPATIBILITY, International Journal of Energetic Materials and Chemical Propulsion, Vol. 22, No. 6, 2023, pp. 1-16

論文: Shen, F.; Totsuka, M.; Kuboyama, T.; Moriyoshi, Y.; Yamada, T.; Shimizu, K.; Yoshida, T.: Effects of pre-chamber specifications on lean burn operation in a pre-chamber engine with fuel reformed gas, SAE Technical Paper 2023-32-0007

論文: Matsuura, Y.; Nitta, K.; Ikeda, H.; Kinoshita, M.; Ui, K.; Tokudome, S.; Hori, K.: Experimental Investigation of Solid Rocket Motor Slag, AIAA SciTech Forum and Exposition, 2023, 2023

論文: Shima, K.; Otaka, Y.; Sato, N.; Funato, Y.; Fukushima, Y.; Momose, T.; Shimogaki, Y.: Kinetic study on heterogeneous nucleation and incubation period during chemical vapor deposition, Journal of Chemical Physics, Vol. 158, No. 12, 2023

論文: Hamada, R.; Sakuragi, T.; Asano, H.; Oniki, T.; Uchiyama, M.: Potential methods to reduce the thermal impact of vitrified waste from spent mixed oxide fuel on geological repositories, MRS Advances, Vol. 8, No. 6, 2023, pp. 274-277

論文: Yu, Y.; Kubota, Y.; Kurita, H.; Narita, F.: Piezoelectric Glass-Fiber-Reinforced Polymer Sensor for Structural Health Monitoring and Stiffness Sensing, Advanced Engineering Materials, 2023

論文: Otobe, T.; Iwakami, A.; Filsinger, D.: Blade vibration visualization of dual volute turbine with vaned nozzle by using high speed Digital Image Correlation, 15th International Conference on Turbochargers and Turbocharging: Proceedings of the 15th International Conference on Turbochargers and Turbocharging (Twickenham, London, 16-17 May 2023), 2023, pp. 251-261

論文: Hirose, Y.; Phaal, R.; Farrukh, C.; Gerdsri, N.; Lee, S.; Yamaoka, H.: Kick-Starting Roadmapping Implementation in Corporate Settings: Lessons Learned From IHI Corporation, International Journal of Innovation and Technology Management, Vol. 20, No. 1, 2023

論文: Tamaki, H.; Yamaguchi, S.: A METHOD FOR PRELIMINARY DESIGN OF VARIABLE GEOMETRY VANED DIFFUSER FOR CENTRIFUGAL COMPRESSOR, Proceedings of the ASME Turbo Expo, Vol. 13, 2023

論文: Sato, K.; Nomura, K.; Sakakibara, Y.; Shioda, Y.; Saito, N.: Microstructural Changes in 9Cr-1Mo-V-Nb Weld Metal after Aging at 1013 K, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 109, No. 3, 2023, pp. 179-188 (in Japanese)

論文: Yonekura, K.; Hattori, H.; Nishizu, T.: Fluid topology optimization and additive manufacturing of a liquid atomizer using an extensive number of grid points: Minimizing pressure loss of liquid atomizer, International Journal of Advanced Manufacturing Technology, Vol. 126, No. 3-4, 2023, pp. 1799-1806

論文: Mueller, J.; Chiba, K.; Oba, Y.: Influence of the Engine Exhaust on the Wing Pressure Distribution, Computed with an Integrated Simulation of Airframe and Running Engine, AIAA Aviation and Aeronautics Forum and Exposition, AIAA AVIATION Forum 2023, 2023

論文: Mori, A.; Otake, S.; Nakata, R.; Shiina, E.; Yamada, K.; Nakaya, T.: FEASIBILITY STUDY OF ULTRASONIC TESTING FROM OUTSIDE OF RPV TO NICKEL BASED ALLOY MATERIAL WELDS, International Conference on Nuclear Engineering, Proceedings, ICONE

論文: Asai, T.; Kaneda, Y.; Shimizu, Y.; Soda, T.; Uchikawa, T.; Sugawara, H.; Kobayashi, T.; Kawabata, Y.: Experimental Verification of Short-Circuit Detection and Thyristor-Based Circuit Shut-Off in Permanent Magnet Synchronous Generators, 2023 25th European Conference on Power Electronics and Applications, EPE 2023 ECCE Europe, 2023

論文: Ota, Y.: Materials I have seen (Self-Introduction), Zairyo/Journal of the Society of Materials Science, Japan, Vol. 72, No. 8, 2023 (in Japanese)

論文: Idani, T.; Shima, T.: Braila bridge: Design and construction of the cable system, IABSE Symposium Istanbul 2023: Long Span Bridges - Proceeding Book, 2023, pp. 995-1002

論文: Kimura, H.; Seo, S.; Abanades, S.: Production of Hydrogen and Carbons by Catalytic Decomposition of C2-Hydrocarbons and Methane With Concentrated Solar Energy, AIP Conference Proceedings, Vol. 2815, No. 1, 2023

論文: Inatomi, T.; Yamamoto, N.; Nakashima, H.; Mori, Y.; Ise, T.; Murata, S.; Yagi, K.; Morita, T.: Investigation of Energy-Scaling of Thrust Performance for Laser Fusion Rocket, Plasma and Fusion Research, Vol. 18, 2023

論文: Ota, Y.; Nakahara, Y.; Sakakibara, Y.: Evaluation of Tensile Properties of Thermoplastic and Thermosetting Resins Using Small Samples with Small Punch Test, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 72, No. 8, 2023, pp. 599-605 (in Japanese)

論文: Mori, T.; Shimada, T.; Kai, S.; Otani, A.; Yamamoto, T.; Yan, X.L.: EXPERIMENT OF FLOATING SEISMIC ISOLATION SYSTEM FOR SMR, International Conference on Nuclear Engineering, Proceedings, ICONE

論文: Kawada, E.; Sato, Y.; Kai, S.; Houghton, Z.; Boyadjian, P.; Koike, D.; Morimoto, Y.: NUSCALE VOYGRTM SMR POWER PLANT TECHNICAL AND SAFETY FEATURES AND ENGINEERING COLLABORATION WITH NUSCALE THROUGH NEXIP INITIATIVE, International Conference on Nuclear Engineering, Proceedings, ICONE

論文: Shioda, Y.; Saito, N.; Nomura, K.; Kubushiro, K.: Creep Rupture Strength and Phase Stability of the Austenite Phase for KA-SUS304J1HTB, Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, Vol. 109, No. 3, 2023, pp. 215-223 (in Japanese)

論文: Murano, F.; Nakayama, M.; Seki, S.; Uchida, Y.: Innovative unloading and lifting system applied for deck erection of new suspension bridge across the Danube river in Romania, IABSE Symposium Istanbul 2023: Long Span Bridges - Proceeding Book, 2023, pp. 560-567

論文: Ishii, Y.; Ohtani, T.; Ishihara, K.; Sakakibara, T.; Kamaya, M.; Ohta, Y.; Kubusiro, K.: Nickel-Based Superalloy Inconel 718, Relation between Non-Linear Ultrasonic and Microstructure Changes under the Creep Damages., Zairyo/Journal of the Society of Materials Science, Japan, Vol. 72, No. 2, 2023, pp. 90-97 (in Japanese)

論文: Yamazaki, R.; Ono, K.; Takeshima, N.; Okada, S.; Kitane, Y.; Matsumura, M.: An analytical study on local buckling strength of box stub-columns made of SBHS500 under axial compression, Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability - Proceedings of the 11th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2022, 2023, pp. 2171-2176

論文: Okada, R.; Murooka, T.; Kato, D.: DISTORTION TRANSFER IN MULTI-STAGE COMPRESSOR AND MODELING OF SPOOL-COUPLING PROBLEM WITH CIRCUMFERENTIALLY DISTORTED INFLOW, Proceedings of the ASME Turbo Expo, Vol. 13A, 2023

論文: Shibukuwa, K.: Seismic Design Method of Crossover Piping Across Building Isolation Boundary, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 7, 2023

論文: Azuma, K.; Fujiwara, K.; Kai, S.; Otani, A.; Furuya, O.: UNCERTAIN FACTORS IN ELASTIC–PLASTIC FINITE ELEMENT ANALYSIS FOR ELBOWS AND TEES, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 7, 2023

論文: Hamano, T.; Shiina, E.; Yagi, T.; Hirano, T.: DEVELOPMENT AND DEPLOYMENT OF ABSOLUTE RECORDABLE MANUAL ULTRASONIC TESTING SYSTEM (ARMUT SYSTEM), International Conference on Nuclear Engineering, Proceedings, ICONE

論文: Okita, Y.; Kazawa, J.; Yamane, T.; Tanaka, N.; Fuchigami, K.; Sato, H.; Hamabe, M.; Tanimitsu, H.: AERODYNAMIC IMPACT OF SECONDARY AIR INJECTION FLOWRATES ON THE MAIN ANNULUS FLOW FIELD AND PERFORMANCE FOR A TRANSONIC HIGH-PRESSURE TURBINE STAGE, Proceedings of the ASME Turbo Expo, Vol. 13B, 2023

論文: Saitoh, H.; Tsunoda, H.: Numerical Analysis on the Effect of Fuel Injection Timing on Auto-Ignition of an Ethanol Spray in a Rapid Compression and Expansion Machine, Journal of Research and Applications in Mechanical Engineering, Vol. 11, No. 1, 2023

論文: Nam, T.H.; Goto, K.; Tobata, Y.; Kubota, Y.; Ueda, M.; Kobayashi, S.: Time-and temperature-dependent compressive behavior of woven carbon fabric reinforced polyamide composite laminate, Journal of Composite Materials, Vol. 57, No. 5, 2023, pp. 929-940

論文: Mori, T.; Shimada, T.; Kai, S.; Otani, A.; Yamamoto, T.; Yan, X.L.: EXPERIMENT OF FLOATING SEISMIC ISOLATION SYSTEM, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 7, 2023

論文: Yamamoto, Y.; Shibuya, Y.; Oyori, H.; Muraoka, M.: Control Design under Limitation of Motor Current for Electric Fuel Metering System with Redundancy on Aircraft Electrification, SAE Technical Paper 2023-01-0987

論文: Kawabata, T.; Gotoh, K.; Yamashita, Y.: Accuracy and Some Problems in Welding Residual Stress Evaluation in WES2805, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 92, No. 3, 2023, pp. 166-172 (in Japanese)

論文: Saito, Y.; Torres, A.T.P.; Ikeda, H.; Nagata, T.; Matsuura, Y.; Igarashi, S.; Chiba, H.; Kida, K.; Kuwahara, T.: Development of Hybrid Thruster Ignition System with Low-Toxicity Fuel and Catalytic Reaction, Proceedings of the International Astronautical Congress, IAC

論文: Serizawa, H.; Inose, K.; Ohashi, R.; Sugimoto, Y.; Minoda, T.; Murakami, T.: Study on Tensile Shear Strength of Dissimilar Lap Joints for Multi-Material Structures, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 41, No. 3, 2023, pp. 124-132 (in Japanese)

論文: Serizawa, H.; Inose, K.; Ohashi, R.; Sugimoto, Y.; Minoda, T.; Murakami, T.: Study on Shear Fatigue Properties of Dissimilar Lap Joints for Multi-Material Structures, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 41, No. 3, 2023, pp. 133-140 (in Japanese)

論文: Yamamoto, Y.; Shibuya, Y.; Oyori, H.; Muraoka, M.: Control Design under Limitation of Motor Current for Electric Fuel Metering System with Redundancy on Aircraft Electrification, SAE International Journal of Advances and Current Practices in Mobility, Vol. 5, No. 5, 2023, pp. 1841-1848

論文: Yao, Y.; Nagasaka, Y.; Hayashi, T.; Kowashi, Y.: Enhancement of Detection Functions of 3D Laser Level-Crossing Obstruction Detecting System, Japanese Railway Engineering, Vol. 63, No. 1, 2023, pp. 7-9

論文: Ikuta, Y.; Saito, H.; Ichikawa, Y.; Ogawa, K.; Ota, Y.; Sakakibara, Y.: Evaluation of Absorbed Energy in High-Velocity Particle Impact for Aero-Engine Materials, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 72, No. 2, 2023, pp. 112-119 (in Japanese)

論文: Chen, G.; Hirohata, M.; Hyoma, K.; Matsumoto, N.; Inose, K.: Experimental comparison on load-carrying capacity of corner joints by laser-arc hybrid welding and arc welding, Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, Vol. 41, No. 4, 2023, pp. 1-4

論文: Avola, C.; Suzuki, T.; May, I.; Tafreshi, A.; Tanigaki, M.; Williams, C.; Briscoe, K.; Gray, B.; Trudeau, J.; Iosifidis, G.; Durbiano, L.; Delavan, M.: VALIDATION OF A 1D MODELING TECHNIQUE TO PREDICT PERFORMANCE OF TURBOCHARGED ENGINES INCLUDING A DOUBLE SCROLL TURBINE WITH CONNECTION VALVE, Proceedings of ASME 2023 ICE Forward Conference, ICEF 2023, 2023

論文: Kota, S.; Yasushi, T.; Takehiro, N.; Kazuhiro, K.; Takahiro, K.; Kyohei, N.; Noriko, S.; Akira, M.; Hiroyuki, H.; Takao, S.; Kazushige, O.; Junichi, I.; Masatsugu, Y.; Koju, N.; Hideo, I.; Kouji, O.; Tomoya, N.; Naoya, E.; Hirokazu, O.; Nobuyoshi, K.; Kyohei, H.; Kimihiko, T.: Nondestructive Evaluation of Long-Term Creep Damage and Its Availability in ASME Grade 91 Steel Welds, Zairyo/Journal of the Society of Materials Science, Japan, Vol. 72, No. 10, 2023, pp. 705-712 (in Japanese)

論文: Simmers, B.; Gerada, C.; Rajashekara, K.; Laskaridis, P.; Seki, N.: Special issue on all-electric and hybrid-electric flight, IET Electrical Systems in Transportation, Vol. 13, No. 1, 2023

論文: Morita, K.: Fatigue Crack Initiation and Propagation Life of Non-load Carrying Welded Fillet Joint Estimated by Local Elasto-plasticity Response, Yosetsu Gakkai Shi/Journal of the Japan Welding Society, Vol. 92, No. 7, 2023, pp. 471-474 (in Japanese)

論文: Shibukuwa, K.: Elastic-Plastic Analysis for Crossover Piping by Using ASME Code Case N-900 and JSME CODE CASE NC-CC-008, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, Vol. 7, 2023